for sale. BRAND NEW AZTEC tail lights to fit a 96jimmy

[addiction2bass]

tho it should fit ALOT OF YEARS!!!!!!! i finaly got the seller to ship them out after 2months of waiting and them saying they would give me a refund. so now that theyve finaly shiped them ive came up with a new plan that i like beter that deal with just using the factory lights with some modifications......LOL but anyways i bought them for 100bucks. would just like my money back. so say 100shiped for them
picture of them at http://images.cardomain.com/member_img_a/332000-332999/332057_31_full.jpg
tho i havent goten them in the mail yet i should get them about mid next week. payment thru paypal is best but money order or cashiers check is acceptable. email or post any questions. i realy need to sell these since i now have no use for them since ive came up with a new master plan

[MDJimmy17s]

ill give you 50

[addiction2bass]

50. come on...... these are brand new! i havent even goten in the mail yet.LOL they should be geting her today tho. 90 is as low as i can go

[MDJimmy17s]

just out of curiosity... what is your new plan?

[addiction2bass]

painted flames..... because eventual im gonna put flames down the side of the car when i get all the body work done that im gonna do and paint them to match. this is a picture of what ive done to the first pair. but i messed up on some but ive goten beter and im confident about the second pair i paint as soon as i find out what color i want the whole car inhttp://images.cardomain.com/member_img_a/332000-332999/332057_64_full.jpg tho i got to play around with the white back up lights alittle more. still figuring it out.....

[MDJimmy17s]

that looks pretty tight, you just painted right on th tailight?

[addiction2bass]

basicaly ya. but its alot tuffer and it takes time and pactience thats for sure! my first one turned out like CRAP!!!! big time!!!!! and my second one turned out beter and hopefully my next pair will turn out even beter. but my first one is just junk. the paint cracked/ clear coat clouded realy bad/ clear coat ran. it just turned out horible and i tried to sand it down some to get some cracks out and well plastic doesnt like sand paper.LOL and well now its ruined..... it cannt be fixed and realy doesnt look good enough to even mess with anymore. so new pair should come in some time the end of this week. and im gonna go cheack out some paint places soon and check out some paint chip books to figure out what color im gonna paint the whole truck when im done.

[addiction2bass]

acouple things you gotta do if you want to paint them. clean them realy good. then tape out your design, or what i did was tape up the whole thing and then draw the design onto it and cut it out with a razor blade then clean it again realy good, use some DARK colored primer. put a good 5 layers on. make sure you give pleanty of dry time between coats! if it runs its junk!!!!! then give it some good dry time between paint, put about 5 layers of paint or until you got the color you want. again pleanty of time between coats!!!!! cannt stress enough. then about an hour after that paint dries peal off the tape VERY CAREFULLY wipe it clean again. then start clear coating it. with VERY THIN QUICK LAYERS WITH ALOT OF DRY TIME BETWEEN COATS. clear coat will give it that shiny wet look, BUT if you put too much at once ON it will cloud up and look crapy and ruin the whole thing!!!!!!! and i put on about maybe 10 layers or so of clear coat just so it wouldnt rubb thru and wear off when you wash your truck. probably not neccesary but i just like to be safe. but remember pleanty of time between coats. and DONT RUSH THRU!!!!! i rushed on my first tail light and FU*KED it all up...... i wish i would have slowed down. but i didnt.
good luck if you try. but if you can practice on some old ones or some clear plexiglass. home depos got it preaty cheap. and if you can paint it fully and have the unpainted spots crystal clear like thier is nothing on it. YOU GOT IT DOWN!!!! go make some money and charge your friends.LOL

[MDJimmy17s]

I have all clear tails on right now, im gonna have try this on my originals. Did you create that flame pattern, or did you get it somewhere. I like it, it looks kinda tribal

[addiction2bass]

ya first i drew it on paper and then cut it out and traced it onto the tape and then cut it out with a razor blade. thats the easy part. painting it is the hard part. im not a pacient person.LOL

[Blazin95Envy]

we did to a friends taillights, i just made a desin out of vinyl and then taped them up and spray tinted it, came out really nice and we did it in about 20 min.

[addiction2bass]

o ya spray tint is quick put to paint the design on you gotta paint the backing thick enough so no light somes thru or it will look like this....LOL http://images.cardomain.com/member_img_a/332000-332999/332057_65_full.jpg

and after geting the aztec lights ive now desided to keep them for now......LOL i like em. not as custom as my flames but my first flames suck, so until i get the new ones done im gonna use these and just be careful with them