Page 1 of 2 12 LastLast
Results 1 to 15 of 18

Thread: $$$ ????

  1. #1
    not low enough yet! dubs's Avatar
    Join Date
    Feb 2002
    Location
    calgary, canada
    Posts
    419

    $$$ ????

    I'm thinking about adding a S10 pick up to my family of chevy's and i want to know what is the cost of getting a full bag set up to lay frame on one? I assume that the cost would be the same for both 1st and 2nd gen trucks?

  2. #2
    Registered User LOtownPumper's Avatar
    Join Date
    Aug 2002
    Location
    Lake Orion, MI
    Posts
    482
    Depends how you want to do it.... Can you or a friend weld? Are you looking to have it done by a shop? Do you want to be able to bolt it on with basic hand tools?

    There are lots of options that really depend on what you want to do with it.

    1st and 2nd Gen S-10's would be the same price to bag...

  3. #3
    not low enough yet! dubs's Avatar
    Join Date
    Feb 2002
    Location
    calgary, canada
    Posts
    419
    I'm looking for a 4 link setup (i hear there better) But i want it to be good reliable and last for a while. I just want to do it right the first time. But i know nothing about how to do it.

  4. #4
    Box Luv BlazingDood13's Avatar
    Join Date
    Jan 2002
    Location
    Ft.Worth, Tx
    Posts
    2,068
    List of what u need

    4 Bags
    Air Line
    Air Fittings
    Air Compressor
    Air Tank
    Air Guages
    Valves
    Wire for the Valves
    Switches for the Bags up/down
    Bag Brackets for the front
    4 link for the rear
    Pressure Switch
    Water Filter
    Teflon Tape

    If you need a Hook up on any of these ideas shoot me a Email I can totally help you out man..

    JazzDude13@hotmail.com
    www.DFWminis.com

  5. #5
    not low enough yet! dubs's Avatar
    Join Date
    Feb 2002
    Location
    calgary, canada
    Posts
    419
    Whats the dollar value of all that? And can i buy a kit with it all in it?

  6. #6
    Doesnt look like this supernova's Avatar
    Join Date
    May 2002
    Location
    baton rouge, la
    Posts
    6,558
    go to suicidedoors.com he has prices on all his stuff and its goods prices

  7. #7
    Stalker Nate Audiodogg's Avatar
    Join Date
    Apr 2002
    Location
    Langley, BC, Canada
    Posts
    2,610
    Hey man over here in BC the shops will do it for $3000CAD cash. For a 4 link though, I'm sure maybe a few hundred more but still cheaper than most places. That includes EVERYTHING you need and all labour. You can't beat it unless you plan on doing everything your self or a good friend.

    Nate

  8. #8
    Sparkerator Dragginblazer's Avatar
    Join Date
    Mar 2002
    Location
    Ft. Worth, TX
    Posts
    2,407
    DFWminis.com
    AIM s/n Dragginblazer

  9. #9
    draggin rocker member clean n low 84's Avatar
    Join Date
    Nov 2001
    Location
    portland, oregon
    Posts
    3,099
    Originally posted by Dragginblazer


    $450.00 www.silverstarcustoms.com
    :rofl:


    since you have a 4x4 you will need custom front bag brackets, PM pr1mo360 he fab's them, $85.
    DRAG THAT SHIT!!!


    My SSM profile, drop a tag!

  10. #10
    Sparkerator Dragginblazer's Avatar
    Join Date
    Mar 2002
    Location
    Ft. Worth, TX
    Posts
    2,407
    ok

    I doubt the new truck will be a 4x4
    DFWminis.com
    AIM s/n Dragginblazer

  11. #11
    Doesnt look like this supernova's Avatar
    Join Date
    May 2002
    Location
    baton rouge, la
    Posts
    6,558
    hahaha, yea me either lol

    ps.....draggin you are so helpful

  12. #12
    Sparkerator Dragginblazer's Avatar
    Join Date
    Mar 2002
    Location
    Ft. Worth, TX
    Posts
    2,407
    Aww thats touching
    DFWminis.com
    AIM s/n Dragginblazer

  13. #13
    draggin rocker member clean n low 84's Avatar
    Join Date
    Nov 2001
    Location
    portland, oregon
    Posts
    3,099
    Originally posted by Dragginblazer
    ok

    I doubt the new truck will be a 4x4
    i must have ADD, i totally missed the new truck part:rolleyes:
    DRAG THAT SHIT!!!


    My SSM profile, drop a tag!

  14. #14
    slammin minisRW
    Guest
    it also depends on what system your gettin. will it be F.B.S.S. or F.B.S.S. seesaw and pancake. if its F.B.S.S. it'll be around $1000 depending on if u do it yourself or if u get a profesional to do it. the other system maybe around $2000, like i said it depends on whose doin it.

  15. #15
    Registered User LOtownPumper's Avatar
    Join Date
    Aug 2002
    Location
    Lake Orion, MI
    Posts
    482
    Originally posted by slammin minisRW
    it also depends on what system your gettin. will it be F.B.S.S. or F.B.S.S. seesaw and pancake. if its F.B.S.S. it'll be around $1000 depending on if u do it yourself or if u get a profesional to do it. the other system maybe around $2000, like i said it depends on whose doin it.

    FBSS and FBSS w/pancake & seesaw are the exact same setups...you just add two switchs (one for pancake and one for seesaw)...The difference in price would be less than $20 (If you are buying your switches independently, as opposed to a switchbox that would have them all included)...

    If you meant FB vs. FBSS, the only difference would be the additional valves. So say $35 for 10mm SMC's, times 4 valves, would be a difference in price of $140. Of course you would also need the additional switches as well.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •