Page 1 of 10 123 ... LastLast
Results 1 to 15 of 138

Thread: 4-link is in...

  1. #1
    streetissuecustoms.com low_blazer's Avatar
    Join Date
    Dec 2001
    Location
    Poulsbo, Washington
    Posts
    1,968

    4-link is in...

    Here ya go...Larry's 4-link is installed. It pretty much kicks ass. Rides like a dream, hooks up like leaf springs never could, gets good lift and gets low enough for me. What was that about behind the axle gets no lift?:nono: :rofl:

    Doug
    '85 Blazer...bagged, small-blocked, back-halfed and body dropped
    http://streetissuecustoms.com/salesban_3.jpg
    Street Issue Customs

    For all your custom fiberglass, interior or stereo needs... Epicenter Designs

    Originally posted by S/T Lover
    That post would have made more sense if you would have just pissed all over the screen and posted a screen shot of that.

  2. #2
    Don't be hatin' chillenblazer's Avatar
    Join Date
    Jan 2002
    Location
    So-Cal
    Posts
    606
    Damn that gets some good lift. DOes it lay good sides? And how far are you from layin frame?

  3. #3
    streetissuecustoms.com low_blazer's Avatar
    Join Date
    Dec 2001
    Location
    Poulsbo, Washington
    Posts
    1,968
    yup..hits mad sides...and I'm just about 2" off the ground in the back..the pumpkin hits the floor before I bottom out on my notch..
    Doug
    '85 Blazer...bagged, small-blocked, back-halfed and body dropped
    http://streetissuecustoms.com/salesban_3.jpg
    Street Issue Customs

    For all your custom fiberglass, interior or stereo needs... Epicenter Designs

    Originally posted by S/T Lover
    That post would have made more sense if you would have just pissed all over the screen and posted a screen shot of that.

  4. #4
    Blazin no mo Forklift's Avatar
    Join Date
    Dec 2002
    Location
    Vancouver WA
    Posts
    8,597
    dam you suck Ive been front bagged for almost 2 years and still no back
    04 EC Silverado 4.8L,Pioneer, Rockford Fosgate, K&N, Viper, ACT, USSpeedo, Matrix, Whelen, Blackbear, 22" Eagles, Nittos,Russel,Magnaflow
    85 S-15 2.5L/4spd, RF P1 subs, highs & T4004, JL 250/1, SD 4-link, AIM LCAs, 1/2 valves, Blazer interior, 17" Eagles w/BFGs, phantom grill, 140 amp alt

  5. #5
    draggin rocker member clean n low 84's Avatar
    Join Date
    Nov 2001
    Location
    portland, oregon
    Posts
    3,099
    nice! I want one.
    DRAG THAT SHIT!!!


    My SSM profile, drop a tag!

  6. #6
    ONCE BAGGED 4X4 MEMBER Trigga187's Avatar
    Join Date
    Oct 2001
    Location
    Big Bad Cali (Hollywood)
    Posts
    1,888
    you lucky punk. Do you have pics of the installation?? Im gonna really need those. Looks very nice.
    Good Bye Blazer




  7. #7
    Sparkerator Dragginblazer's Avatar
    Join Date
    Mar 2002
    Location
    Ft. Worth, TX
    Posts
    2,407
    Now if it laid out it would get less lift. 2" less? Is the front all the way up in those pics? Dosen't look like it to me. I know when my blaze had 2600s over the axle the lift sucked ass. But mine laid out :rofl:

    With the front and the back aired all the way up there was a huge differance.
    DFWminis.com
    AIM s/n Dragginblazer

  8. #8
    Draggin body packofqtips's Avatar
    Join Date
    Sep 2002
    Location
    massachusetts
    Posts
    2,812
    damn when i do mine i want it to lay out thats why im going with the canti 2 link and i have my floor cut out
    2009 ford fusion
    1997 bagged and body dropped suburban
    2003 yamaha road star warrior
    still got the 4 Door Love

  9. #9
    www.dennysigns.com xtremer-pxl's Avatar
    Join Date
    Jan 2003
    Location
    Kansas
    Posts
    338
    I really like the lift your getting...

    your still 2" from the ground DAMN. Im only about 3/4" from it I would have figured you would be that close..you must be running some taller tires than me...
    KAPOW!

  10. #10
    Registered User pr1mo360's Avatar
    Join Date
    Mar 2002
    Location
    Henderson,NV
    Posts
    2,562
    thats what a bagged blazer x looks lke wit no body kit :rofl:

  11. #11
    draggin rocker member clean n low 84's Avatar
    Join Date
    Nov 2001
    Location
    portland, oregon
    Posts
    3,099
    nice, that is some good lift. How are you so far some layin out? I'm only 2.25" off the ground in back and i'm not even notched yet. any inside word on what the 4 link will sale for yet?
    DRAG THAT SHIT!!!


    My SSM profile, drop a tag!

  12. #12
    Registered User LOtownPumper's Avatar
    Join Date
    Aug 2002
    Location
    Lake Orion, MI
    Posts
    482
    omg...

    Of course it is not going to lay out unless he step notches it and cuts out the floor...That kit is perfectly capable of laying out... It would lift 2" lower than that (obviously), but why would you need it any higher? Oh no, you could only untuck your wheel 8 inches instead of 10 inches...




    btw-someone seems to have inferiority complex about x-Blazers...

  13. #13
    www.dennysigns.com xtremer-pxl's Avatar
    Join Date
    Jan 2003
    Location
    Kansas
    Posts
    338
    Originally posted by LOtownPumper
    omg...

    Of course it is not going to lay out unless he step notches it and cuts out the floor...
    why not... Im close to laying w/ just a bolt in. If i had 17's instead of my 18's i think it would lay out. Im at 3/4" and that is not that far from laying. but right now the pumpkin hitting the floor board is stopping me...
    KAPOW!

  14. #14
    Doesnt look like this supernova's Avatar
    Join Date
    May 2002
    Location
    baton rouge, la
    Posts
    6,558
    I dont care if it lays, that thing is bad ass.I want one of those 4 links

  15. #15
    www.dennysigns.com xtremer-pxl's Avatar
    Join Date
    Jan 2003
    Location
    Kansas
    Posts
    338
    hey doug, you got any pics of where the bags are mounted? I would like to see that!
    KAPOW!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •