Results 1 to 10 of 10

Thread: "ZZ4" short block for sale

  1. #1
    I'm no post whore Ericoo1's Avatar
    Join Date
    Sep 2002
    Location
    Fort Worth (Saginaw), Texas
    Posts
    807

    "ZZ4" short block for sale

    Heres the deal: I've got a 350 vortec block (#10243880), same block used for the ZZ4 crate motors, stock vortec rods and crank, and a set of new forged speed pro flat tops w/rings (part # L2256F). The motor has been out of service since mid 2001 and was still under GM warranty so I'm assuming it's a '98 or '99 block, same with the rods and crank.
    Some time over the weekend a battery blew up and my buddies job and got to 4 of the pistons. Maybe they are still good, maybe not. We've cleaned them and I really don't see a problem, that doesn't mean that none exist. it looks like it just took the shiny finish off in a few places. The other 4 are perfectly fine!!!! everything else was here at my house so nothing else was harmed by the acid. I've been looking for a reason to go with a 383 or 400 and this pushed me over the edge. I'll ship the pistons and/or the rods, but crank or block are pick up only.
    Last edited by Ericoo1; 09-16-2003 at 10:31 PM.

  2. #2
    I'm no post whore Ericoo1's Avatar
    Join Date
    Sep 2002
    Location
    Fort Worth (Saginaw), Texas
    Posts
    807
    $130 for pistons w/ rings, $60 rods, $40 crank, $75 for the block. come on, someone support the 383 fund

  3. #3
    Registered User Catching Second's Avatar
    Join Date
    May 2003
    Location
    Charles Town, West Virginia
    Posts
    4,308
    I would seriously think about it but look at where you are and then look at where I am.
    "A true hotrodder wouldn't be content untill he had created a car so violent, so hairy, so totally sick that the very act of dropping the hammer would result in instant death. Anything less results in the need to go faster." - Tony DeFeo

  4. #4
    I'm no post whore Ericoo1's Avatar
    Join Date
    Sep 2002
    Location
    Fort Worth (Saginaw), Texas
    Posts
    807
    i also have the factory roller lifters $45

  5. #5
    Registered User Catching Second's Avatar
    Join Date
    May 2003
    Location
    Charles Town, West Virginia
    Posts
    4,308
    Any roller rockers?
    "A true hotrodder wouldn't be content untill he had created a car so violent, so hairy, so totally sick that the very act of dropping the hammer would result in instant death. Anything less results in the need to go faster." - Tony DeFeo

  6. #6
    I'm no post whore Ericoo1's Avatar
    Join Date
    Sep 2002
    Location
    Fort Worth (Saginaw), Texas
    Posts
    807
    nope just the crappy stamped ones, althought the ones I do have are brand new from the set of vortec heads I to buy, I also have the stock valve springs, new also

  7. #7
    I'm no post whore Ericoo1's Avatar
    Join Date
    Sep 2002
    Location
    Fort Worth (Saginaw), Texas
    Posts
    807
    I'm sure there's something here someone needs!!!!!!!!

  8. #8
    I'm no post whore Ericoo1's Avatar
    Join Date
    Sep 2002
    Location
    Fort Worth (Saginaw), Texas
    Posts
    807
    still up for grabs, everyone says they want it, and none ever gets back to me. $250 for everything if someone local wants it

  9. #9
    Registered User ZZ4Blazer's Avatar
    Join Date
    Dec 2001
    Location
    Akron, Ohio
    Posts
    6,226
    Originally posted by Ericoo1
    i also have the factory roller lifters $45
    How many miles are on them?
    Jim 94 Stepside
    ZZ430 clone V8
    NX kit in the works
    Tremec T56 6 speed
    8.5" rear
    Quote Originally Posted by Harley
    Go before show any day of the week.

  10. #10
    I'm no post whore Ericoo1's Avatar
    Join Date
    Sep 2002
    Location
    Fort Worth (Saginaw), Texas
    Posts
    807
    not sure, the motor was still under warranty when removed in 2001

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •