Page 2 of 2 FirstFirst 12
Results 16 to 29 of 29

Thread: ?'s about dropin 4x4

  1. #16
    Evil Innovations
    Join Date
    Mar 2002
    Location
    Ohio
    Posts
    123
    ya me too
    4x4 thats lowered
    and needs to be lower

  2. #17
    Registered User Extreme's Avatar
    Join Date
    Nov 2001
    Location
    Ontario,Canada
    Posts
    324

    Post Alright

    ok i did NOT use the t-bar trick.
    and i didn't buy any after market kits.

    the ride it stiff and there is little travel in the front and back
    but thats with stock bump stops in
    i am just rining barley on the front, i cut alittle off
    and i am less than an inch off the rear

    the rear is dearched
    and the front all i ised was a torch and a thinner peace of steel
    the cross member than hold the blocks and the keys is all i relly changed
    i relocated the position of the hole that the blocks sit in
    i moved them further down almost to where the metal folds but not quite so there is still strength, then i used the smaller steel and replace the block with it
    the thinkness of the stell i used is about less and a 1/4 of the OEM block

    if u relly wanted u canused alittle thicker metal drill a hole and tap it so u have an adjuster bot if u need to go up

    i hope that answers any question on how i did my drop
    and dies it look like 5/5 becasue i dunno?
    i forgot to measure
    Whats Next

  3. #18
    Evil Innovations
    Join Date
    Mar 2002
    Location
    Ohio
    Posts
    123
    i understand wat ur sayin then i dont
    do u happen to have ne pics
    4x4 thats lowered
    and needs to be lower

  4. #19
    Registered User Extreme's Avatar
    Join Date
    Nov 2001
    Location
    Ontario,Canada
    Posts
    324
    i will try to get some
    Whats Next

  5. #20
    Evil Innovations
    Join Date
    Mar 2002
    Location
    Ohio
    Posts
    123
    sweet im prolly gonna do it this weekend as long as i can find asome rims to put on it for now to drop on
    4x4 thats lowered
    and needs to be lower

  6. #21
    Registered User Extreme's Avatar
    Join Date
    Nov 2001
    Location
    Ontario,Canada
    Posts
    324
    waiting for the [ic to be develpoed then i gotta scant them and send the to S10 blazed
    i only got one of the t-bars it was snowing and i couldn't get a hoist but i did get more of the truck
    Whats Next

  7. #22
    Evil Innovations
    Join Date
    Mar 2002
    Location
    Ohio
    Posts
    123
    sweet i cant wait to see them
    4x4 thats lowered
    and needs to be lower

  8. #23
    '93 Typhoon / 97 Isuzu C-Town216's Avatar
    Join Date
    Jan 2002
    Location
    Cleveland, Ohio
    Posts
    945
    Has anyone fixed the negative camber on the slammed 4X4 yet?

  9. #24
    Evil Innovations
    Join Date
    Mar 2002
    Location
    Ohio
    Posts
    123
    Did u ever take those pics yet Extreme?
    4x4 thats lowered
    and needs to be lower

  10. #25
    Registered User Extreme's Avatar
    Join Date
    Nov 2001
    Location
    Ontario,Canada
    Posts
    324
    they have been takin
    just waitin on devloped
    Whats Next

  11. #26
    Evil Innovations
    Join Date
    Mar 2002
    Location
    Ohio
    Posts
    123
    ic ic and wat do u mean by dearching the leafs
    4x4 thats lowered
    and needs to be lower

  12. #27
    Registered User Extreme's Avatar
    Join Date
    Nov 2001
    Location
    Ontario,Canada
    Posts
    324

    ya

    ok i mean that i took my truck to the sring shop and for 50 bucks they took out my load spring and compressed the leaf and made it insterad of beng arched in is now almost straignt
    Whats Next

  13. #28
    Evil Innovations
    Join Date
    Mar 2002
    Location
    Ohio
    Posts
    123
    cool ic
    4x4 thats lowered
    and needs to be lower

  14. #29
    Evil Innovations
    Join Date
    Mar 2002
    Location
    Ohio
    Posts
    123
    how is ur camber also my keys are flipped now and its awful i need to be a lil practible i wonder if i welded a peice of steel at the bottom of the crossemeber woiuld it give me a 5" inch drop like urs i think it will
    4x4 thats lowered
    and needs to be lower

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •