Results 1 to 12 of 12

Thread: '87 S-10 Blazer Moulding

  1. #1
    Registered User
    Join Date
    Mar 2002
    Posts
    16

    Question '87 S-10 Blazer Moulding

    Anyone know if there are holes in the body for the lame ass moulding that is around the bottom half of an 87 Blazer?

    How about the large Chevrolet Label on the rear tail gate, any hole in the body there? Or just 3M foam adhesive???

    Thanks!

  2. #2
    Body Mod Genius
    Join Date
    Nov 2001
    Location
    near philly
    Posts
    211
    Yes the tail gate has three holes and I'm pretty sure the other ones do too so your goin to have to do some body work if u don't want them anymore
    Lata :bigthumb:

  3. #3
    The ONE and The ONLY BlazinBlue's Avatar
    Join Date
    Oct 2001
    Location
    Broken Arrow,OK
    Posts
    1,585
    The only things with holes is the BLAZER or S10 logos, The rest is Duble sided tape. Engine size emblem, CHEVROLET on tailgate and Black roket panels... all taped on...

    MINES AN 88 Blazer... NO HOLES!!!
    Tulsa Chaper VP - Vertically Challenged
    :smoker: - 1989 S10 Blazer 2dr - 1995 F/S 4x4 -:smoker:

    BLAZINLOW MEMBER #11

  4. #4
    Body Mod Genius
    Join Date
    Nov 2001
    Location
    near philly
    Posts
    211
    blazinblue are u talking about the Blazer thats on the lower left of the tailgate???:confused:
    Last edited by snakes10; 04-03-2002 at 06:47 PM.

  5. #5
    The ONE and The ONLY BlazinBlue's Avatar
    Join Date
    Oct 2001
    Location
    Broken Arrow,OK
    Posts
    1,585
    Snakes-I was talking about the BLAZER logos on the fenders also...

    Well... YOU MAY BE RIGHT! b/c mine has one BIG ASS CHEVROLET logo all accross the whole tailgate and it has NO holes. s10 BLAZERS with the spare on the outside has a smaller CHEVROLET logo on the lower drivers side of the tailgate and it might have holes...

    Well I'm still 100% sure that the roket panels are duble sided tape. and the engine logo is most likly too.
    Last edited by BlazinBlue; 04-03-2002 at 06:59 PM.
    Tulsa Chaper VP - Vertically Challenged
    :smoker: - 1989 S10 Blazer 2dr - 1995 F/S 4x4 -:smoker:

    BLAZINLOW MEMBER #11

  6. #6
    My Dixie Wrecked kalvin06's Avatar
    Join Date
    Mar 2002
    Location
    SC
    Posts
    25
    i have an 87 with the big ass "Chevrolet" metal plate on my tailgate.i dont think it has any holes but im not a blazer knowitall so dont take my word. but i kinda like my chevy plate.

  7. #7
    Body Mod Genius
    Join Date
    Nov 2001
    Location
    near philly
    Posts
    211
    oh ok b/c I was pretty sure when I got my dads blaze it was off but he had the tire on the outside. I think we are talkin about two different decals.

  8. #8
    Registered User
    Join Date
    Mar 2002
    Posts
    16
    Thanks everyone! That molding is to be considered GONE!

  9. #9
    Registered User 16years&blazin's Avatar
    Join Date
    Feb 2002
    Location
    Summerville, South Carolina
    Posts
    838
    yoe all said that the "BLAZER" logos on the corner of the front fenders have logos?

    because i wanna take 'em off

    thanks
    Yahoo! Messenger = wintermc
    AOL Messenger = wintermc2

  10. #10
    Registered User
    Join Date
    Mar 2002
    Posts
    16
    From what I understand and have observed on my 87, the blazer logos on the front fenders, (just forward of the doors), and the engine logo on the front drivers bumper area, are the only molding that use holes drilled in the body for mounting.

  11. #11
    Registered User 16years&blazin's Avatar
    Join Date
    Feb 2002
    Location
    Summerville, South Carolina
    Posts
    838
    yoe all said that the "BLAZER" logos on the corner of the front fenders have logos?
    I meant to say- "you all said that the "BLAZER" logos on the corner of the front fenders have HOLES?
    Yahoo! Messenger = wintermc
    AOL Messenger = wintermc2

  12. #12
    Registered User
    Join Date
    Mar 2002
    Posts
    16
    Yeah, the blazer logos do have holes. I can tell on my 87 because they are a little loose, and the whole logo wiggles as one peice, meaning a stud is mounted in the body.

    A little body work can take of those holes!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •