Page 9 of 9 FirstFirst ... 789
Results 121 to 125 of 125

Thread: pics of my belltech key install

  1. #121
    Registered User LaynLo17's Avatar
    Join Date
    May 2003
    Posts
    417
    Originally posted by pimpinblazer89
    i lowered the front and drove around with my 235/ 75/ r15 stock tires and did not seem to rub at all i have the front lowered about 4 inches
    same here, but the tires are not 31" tall, they are 29"
    My trucks have a few mods

  2. #122
    built not bought pimpinblazer89's Avatar
    Join Date
    May 2004
    Location
    Waterbury CT
    Posts
    2,798
    Originally posted by LaynLo17
    same here, but the tires are not 31" tall, they are 29"
    yeah true my stock tires where about 29"
    Jeff
    89 4x4 blazer slammed shaved
    83 2wd blazer stock << frame for my 89
    85 olds 98 daily driver

    http://www.cardomain.com/id/pimpinblazer89

    AIM: pimpinblazer89

  3. #123
    will work for food! phatfarmer2's Avatar
    Join Date
    Dec 2003
    Location
    North NJ
    Posts
    7,295
    Originally posted by jimmy_86
    you guys that keep the stock 31' tires after u lower it
    dont your tires rub like a bitch?
    if not what is your tire size
    i got 255/55/r18 and i have the front lowered 4.5 and back 3 and yea they rub!... lol all four will rub if i go over some decent size bumps. Also they rub in the back a lot if i have more than one person in the back seat, so im gettin a pair of air shocks and that should hopefully firm up the rear and prevent the tires from hitting, and if that works well i myt get a set for the front. its not really a big deal now that i got used to it and know to slow down over bumps, its fine i have about 1.5 inch clearence between the tires and wheelwell.
    Grounded 4 Life
    "continuing where the factory left off"

    Street Source page

    Projects i've done

    V8 Love
    Pneumatic Love

  4. #124
    Registered User Titus's Avatar
    Join Date
    Jul 2003
    Location
    Des Moines, IA
    Posts
    135
    those are about 18x8's right? that is the size i was planning on getting too. do they stick out from the fender quite a bit and rub on the fender lip or where exactly are they rubbing at?
    93 Chevrolet Blazer
    4x4 5-Speed 2-Door
    3" front / 4" rear
    K&N, TB Spacer, Hypertech Chip, 160deg. powerstat, 8.8mm wires
    http://www.cardomain.com/ride/2125307

  5. #125
    will work for food! phatfarmer2's Avatar
    Join Date
    Dec 2003
    Location
    North NJ
    Posts
    7,295
    18X9 and they rubbed on the inner fender well on the side. so i "worked it" with a sledge hammer. no rubbing there now, but it rubbs on the top of the fender, so i rolled that under a bit but it still hits soem times, it did hit the fender hard witht the tire one day over a big bump and actually dented the fender.. woops! but hey it works fine for me so its all good. thats the life of driving a mini truck.
    Grounded 4 Life
    "continuing where the factory left off"

    Street Source page

    Projects i've done

    V8 Love
    Pneumatic Love

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •