Page 2 of 3 FirstFirst 123 LastLast
Results 16 to 30 of 40

Thread: LT-1 engine and tranny for sale

  1. #16
    Registered User FabianSS357's Avatar
    Join Date
    May 2004
    Location
    Near Houston
    Posts
    1,968
    Originally posted by zach
    Fabian,
    The engine is complete with all brackets
    alt and a/c comp. Computer and new
    fuel pump will be included.
    Ok that sounds great, ill definantly give you a call somtime in the next few days.
    Till i can do so i have just a few questions on it that im hoping you can help me with.

    Is the comp reprogramed to handle the head/ other performance increase or is it just running in the stock mode?

    i didnt see a mention of a harness so im guessing ill have to get a painless correct?

    i noticed the PS pump on it in the pics, is it included as well?

    im also running a 700R4 for it and im not too familiar with the newer 4l60e im guessing it still has the same bellhousing pattern, so my question is,
    i can get the comp to think it has a manual tranny and just run the 700? or do i need the manual tranny comp?

    sorry for the forty questions, im new to LT1 swaps, i was hoping to get a TPI in if i didnt find an LT1 so i have been researching the TPI more then the LT1s.

    thanks for any info u can get me.
    and ill give you a call hopefully tonight.
    Superbee is a Flaming homosexual!
    A firm believer that women are physcotic.

  2. #17
    Import Killa zach's Avatar
    Join Date
    Sep 2002
    Location
    North Bama
    Posts
    476
    Allright guys,
    The puter has not been hacked yet.
    The mods are minimal wich include a
    slight cleanup of the intake and
    exhaust ports. The 4L60E is the electronic
    version of the 700R4.
    The tranny is included and I would
    suggest having a 2wd output shaft
    installed and using it. The shift points
    can be user calibrated with the proper
    software.
    However if you want to run a 700R4
    The computer can be hacked to run with the 700.
    I would suggest www.PCMforless for
    having the puter hacked.

    I also forgot it has a new MSD coil and
    MSD 8.5 wires.

    The power steering pump is also included as well as a Tarus fan with a
    custom sheet metal fan shroud

    You will have to suply a harness

    I hate to part with this project but due
    to a severe back injury I am no longer
    able to do much work for a long period of time. I have trouble sitting standing
    and walking.

    This swap is actually easier than the
    TPI swap as far as hacking the wiring
    harness goes.

    Zach
    Last edited by zach; 03-24-2005 at 02:55 PM.
    Originally posted by Blazin Low

    I hope he has an epileptic fit while holding that chainsaw and takes himself and his boyfriend out.


    85 4x4 AWD mustang killing
    LT-4 powered bad
    mama jama.

  3. #18
    Search Button Mod BlazerINtheWork's Avatar
    Join Date
    Nov 2002
    Location
    Jacksonville, FL
    Posts
    5,525
    would you be willing to sell without the tranny?
    Originally posted by Baggd2DaXtreeme
    anyone who posts regularly and doesnt donate is a freeloader.
    Quote Originally Posted by banginjimmy(in reference to BlazinLow) View Post
    There are those times where its simply better than real life
    4 Door Love

  4. #19
    Import Killa zach's Avatar
    Join Date
    Sep 2002
    Location
    North Bama
    Posts
    476
    Well,
    I guess so but it is going to be the same
    price regardless if the tranny goes or not.

    I have more than 2500.00 in the engine and tranny even before the Aluminum heads and the rebuild of the tranny.

    Zach
    Originally posted by Blazin Low

    I hope he has an epileptic fit while holding that chainsaw and takes himself and his boyfriend out.


    85 4x4 AWD mustang killing
    LT-4 powered bad
    mama jama.

  5. #20
    Import Killa zach's Avatar
    Join Date
    Sep 2002
    Location
    North Bama
    Posts
    476
    TTT

    This has to go It is in my way.

    1800.00 takes it all.

    May take in a trade for a restorable
    1936-1937 John deere "A"
    or a 1940's to 1950's "B" or "G".
    Or a "60".

    Farmall Cub "Super C"

    Case 630 wide front end row crop.

    Maybe even an 8N Ford

    Zach
    Last edited by zach; 06-03-2005 at 11:44 AM.
    Originally posted by Blazin Low

    I hope he has an epileptic fit while holding that chainsaw and takes himself and his boyfriend out.


    85 4x4 AWD mustang killing
    LT-4 powered bad
    mama jama.

  6. #21
    Registered User
    Join Date
    Mar 2005
    Location
    pittsburgh pa
    Posts
    166
    if in only had 1800
    ________
    MILF LESBIAN
    Last edited by sickblazer; 03-16-2011 at 07:53 PM.

  7. #22
    Import Killa zach's Avatar
    Join Date
    Sep 2002
    Location
    North Bama
    Posts
    476
    TTT for edit.

    Maybe some of you Northern guys may
    run across some of the above listed
    items.

    Zach
    Originally posted by Blazin Low

    I hope he has an epileptic fit while holding that chainsaw and takes himself and his boyfriend out.


    85 4x4 AWD mustang killing
    LT-4 powered bad
    mama jama.

  8. #23
    60 PSI on stock hg! Ow! LowSlungFury's Avatar
    Join Date
    Dec 2002
    Location
    Tunkhannock, PA
    Posts
    1,860
    I have a 1953 9N Jubilee, engine was just freshened about a year and half ago, new exhaust, rear tires are about 4 years old but the tractor never gets used, has new 3 rib fronts as of last fall. The only problem is that I have had a couple people offer me a good chunk of change for it. I don't know if you are interested but maybe work a trade/cash deal, but I don't know if you would want to do that.

    I am also having a Farmall Super MTA redone by my neighbor who restores tractors. Let me check around I might be able to help you out on a tractor.
    1993 Dodge 2wd Diesel Dually, BIG fueling mods, 6x16 injectors, Air Dog 1/2" draw straw, 3/8" fuel feed, Holley Blue pump, HE351VE VGT (manual controller), 5" turbo back, 5" air intake, Green filter, to many gauges, more mods to come.

    1993 Dodge Dakota Sport 2wd, 3.9L Magnum (w/5.2L Magnum swap in progress) 5spd, Magnaflows with duals out the back, 4/6 drop on 17" R/T's.

  9. #24
    Import Killa zach's Avatar
    Join Date
    Sep 2002
    Location
    North Bama
    Posts
    476
    Thanks LowSlung,

    See what you can dig up.

    What would you have to have for your
    9N?

    Zach
    Originally posted by Blazin Low

    I hope he has an epileptic fit while holding that chainsaw and takes himself and his boyfriend out.


    85 4x4 AWD mustang killing
    LT-4 powered bad
    mama jama.

  10. #25
    60 PSI on stock hg! Ow! LowSlungFury's Avatar
    Join Date
    Dec 2002
    Location
    Tunkhannock, PA
    Posts
    1,860
    I have been offer $4600. I have a real hard time getting rid of it though, it was my grandfathers and I bought it from my grandmother after he had passed away.

    I have a couple I am going to go check out later on today. I'll be in contact with you to let you know what turns up.
    1993 Dodge 2wd Diesel Dually, BIG fueling mods, 6x16 injectors, Air Dog 1/2" draw straw, 3/8" fuel feed, Holley Blue pump, HE351VE VGT (manual controller), 5" turbo back, 5" air intake, Green filter, to many gauges, more mods to come.

    1993 Dodge Dakota Sport 2wd, 3.9L Magnum (w/5.2L Magnum swap in progress) 5spd, Magnaflows with duals out the back, 4/6 drop on 17" R/T's.

  11. #26
    South Dakota Rep. appelten911's Avatar
    Join Date
    Nov 2004
    Location
    South Dakota
    Posts
    31
    is that 18 shipped or plus shipping??

  12. #27
    Import Killa zach's Avatar
    Join Date
    Sep 2002
    Location
    North Bama
    Posts
    476
    Plus freight collect.

    Zach
    Originally posted by Blazin Low

    I hope he has an epileptic fit while holding that chainsaw and takes himself and his boyfriend out.


    85 4x4 AWD mustang killing
    LT-4 powered bad
    mama jama.

  13. #28
    Import Killa zach's Avatar
    Join Date
    Sep 2002
    Location
    North Bama
    Posts
    476
    Guys,
    This has to go.
    I am dropping the price down and
    throwing in the truck with it.

    1600.00

    Zach
    Originally posted by Blazin Low

    I hope he has an epileptic fit while holding that chainsaw and takes himself and his boyfriend out.


    85 4x4 AWD mustang killing
    LT-4 powered bad
    mama jama.

  14. #29
    Doesnt look like this supernova's Avatar
    Join Date
    May 2002
    Location
    baton rouge, la
    Posts
    6,558
    omg, thats what i paid for my fucking bare ass crate motor long block. HOw the fuck do all these deals happen on parts/trucks when im almost done, someone please buy this from him just so i dont have to be taunted by a super fucking deal

  15. #30
    Import Killa zach's Avatar
    Join Date
    Sep 2002
    Location
    North Bama
    Posts
    476
    TTT

    Will consider trades for another Bridgeport in good shape or a Lincoln
    square wave 175 TIG machine or larger.

    Zach
    Originally posted by Blazin Low

    I hope he has an epileptic fit while holding that chainsaw and takes himself and his boyfriend out.


    85 4x4 AWD mustang killing
    LT-4 powered bad
    mama jama.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •