Results 1 to 10 of 10

Thread: Going Lower...

  1. #1
    Waitin' for BAGS!! 02'Blazin's Avatar
    Join Date
    Apr 2004
    Location
    Bedford, Tx (outside Dallas)
    Posts
    242

    Going Lower...

    Finally got my front spindels. Just gotta pick up some blocks and then i'm droppin it this week. I'm only doing a 2/3 drop right now. I'm working at getting some front coils and leafs for a total 4/5. Cant wait!!

    I'll post pictures when it's done....
    02' S-10 Blazer (Dropped 4/5)

    http://www.drasticmeasuresclub.com

  2. #2
    Waitin' for BAGS!! 02'Blazin's Avatar
    Join Date
    Apr 2004
    Location
    Bedford, Tx (outside Dallas)
    Posts
    242
    Here it is. It looks better then stock but it ain't low enough....You can check out my Cardomain site to see it stock and lowered...
    02' S-10 Blazer (Dropped 4/5)

    http://www.drasticmeasuresclub.com

  3. #3
    SmOkeD OuT EhLoW420's Avatar
    Join Date
    Oct 2003
    Location
    CT
    Posts
    464
    Good start,looks good, but the 4/5 drop will look alot better.
    To LoW 4 A FaT HoE

    86 2dr,2wd blazer, shaved everything,bagged,rollin on 20's

  4. #4
    Senior Member smullen's Avatar
    Join Date
    Apr 2002
    Location
    ST. Louis, ""THA LOU""
    Posts
    2,360
    Originally posted by 02'Blazin
    Here it is. It looks better then stock but it ain't low enough....You can check out my Cardomain site to see it stock and lowered...
    Yea I lowered my 00 Blazer with

    3" Drop Coils and 2 " Spindles
    3" Drop Leafs and 3" Blocks Angled (drop shocks all around)

    and it still needs to go lower...

    You'll need a Notch if you go more than say 4" in the rear...
    2000 S-10 Blaza, Wit sum Ghosty Flames sittin on sum Dubbs

  5. #5
    Waitin' for BAGS!! 02'Blazin's Avatar
    Join Date
    Apr 2004
    Location
    Bedford, Tx (outside Dallas)
    Posts
    242
    Got my coils Thursday. Went with DJM 2in coils. Then i'm De-arching the rear Leafs 2in. so a total 4/5 drop. It goes in Monday, i hope to get it back Tuesday. I'll post pics when i get it back...
    02' S-10 Blazer (Dropped 4/5)

    http://www.drasticmeasuresclub.com

  6. #6
    SmOkeD OuT EhLoW420's Avatar
    Join Date
    Oct 2003
    Location
    CT
    Posts
    464
    Its gonna look good.
    To LoW 4 A FaT HoE

    86 2dr,2wd blazer, shaved everything,bagged,rollin on 20's

  7. #7
    Waitin' for BAGS!! 02'Blazin's Avatar
    Join Date
    Apr 2004
    Location
    Bedford, Tx (outside Dallas)
    Posts
    242
    Woooo the 4/5 drop is done!! So much better looking. Next step is to get some lower profile tires (on the stocks) and give it a little better look. The bumpstops are pushin the rear a little bit, we gotta cut em' tomorrow or something.....The pictures are too big but check out my WWW and see it there....
    02' S-10 Blazer (Dropped 4/5)

    http://www.drasticmeasuresclub.com

  8. #8
    Senior Member smullen's Avatar
    Join Date
    Apr 2002
    Location
    ST. Louis, ""THA LOU""
    Posts
    2,360
    Originally posted by 02'Blazin
    Woooo the 4/5 drop is done!! So much better looking. Next step is to get some lower profile tires (on the stocks) and give it a little better look. The bumpstops are pushin the rear a little bit, we gotta cut em' tomorrow or something.....The pictures are too big but check out my WWW and see it there....
    If yourr that low where your hittin on the Bump stops after the rubber snubbers have been removed, you need to start looking into a 2.5"+ C-Notch.....

    I can tell you from experience or you can come ride in mine sometime...
    2000 S-10 Blaza, Wit sum Ghosty Flames sittin on sum Dubbs

  9. #9
    Waitin' for BAGS!! 02'Blazin's Avatar
    Join Date
    Apr 2004
    Location
    Bedford, Tx (outside Dallas)
    Posts
    242
    Originally posted by smullen
    If yourr that low where your hittin on the Bump stops after the rubber snubbers have been removed, you need to start looking into a 2.5"+ C-Notch.....

    I can tell you from experience or you can come ride in mine sometime...

    We cut the bumpstops today. We cut off the complete first 'nub' and it's still sitting leaf to bumpstop. But the trucks sittin even right now and i think were gonnna leave it as is. It aint a bad ride or anything. It's still smooth, plus i got stock tires on it (real bouncy) the axle isn't hittin anywhere. Plus i don't see anything touch the brake lines either. It looks to have about an inch clearence....
    02' S-10 Blazer (Dropped 4/5)

    http://www.drasticmeasuresclub.com

  10. #10
    Switchcraft Customs DJ Nitrous 427's Avatar
    Join Date
    Feb 2004
    Location
    Albany, GA
    Posts
    548
    i have a 3/4 drop....4 block in rear though but i too had enough clearance at first a few pot holes later my brake line ... stock braded it appears...has rubbed a marking on my stock ehaust pipe...that'll soo be changed though but no other problems I've had to point out to you..
    Last edited by DJ Nitrous 427; 08-29-2004 at 12:32 AM.
    Premier 880PRS
    ARC PEQ 7 (Silver Edition)
    ARC KAR 265 Componets
    ARC KAR 6932 6x9s
    15" RE Destroyer in 5 cubes @ 27hz

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •