Results 1 to 2 of 2

Thread: wire harness?

  1. #1
    Registered User
    Join Date
    Nov 2001
    Location
    Pennsylvania
    Posts
    35

    wire harness?

    I have a 1986 2 wheel drive blazer. It used to have a fuel injected 2.8 in it. I finished tearing it out and i want to get rid of the wire harness. I traced it back to the fuse box and removed it from the truck. What wires do I need to put back and how do I remove the wires that i don't need anymore. A carburated 350/turbo350 it going in it.
    I know I need to leave the wires for the lights in the front and for the starter. Do I just cut the rest of the wires off at the fuse box?
    Confused.

  2. #2
    Registered User
    Join Date
    Nov 2001
    Location
    Indiana
    Posts
    7
    You will probably need most of the wires that go to the fuse box you will need wires for the alt. starter and coil or distributor heater if you plan to keep it.
    The easiest thing to do is just wait till you get everything hooked up then cut what you dont need
    hope this helps Randys10

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •