Page 1 of 2 12 LastLast
Results 1 to 15 of 19

Thread: fully independent suspension?

  1. #1
    BL Metalhead thechariot's Avatar
    Join Date
    Nov 2004
    Location
    st. louis
    Posts
    2,539

    fully independent suspension?

    didnt a blazer here have a fully independent suspension...or am i thinking of something else. how hard would this be to do? im not doing it, just wondering about it. anyone?
    92 blazer 4 door 4.3 2wd, 00 s10, 03 accord v6


    Originally posted by 668
    I fuckin popped her, held back a little, but I clipped her pretty good.


  2. #2
    2wd owning member bmxr4life87's Avatar
    Join Date
    May 2003
    Location
    Sapulpa, Oklahoma
    Posts
    1,584
    do u mean like independant rear suspension since the front is already independant?
    NEW RIDE 89 s10 std cab shortbed 2.5 5 speed 2WD slammed 6/5
    90 4x4 2dr, primer, 18's, 4.3, rollpan, 6/6 slam, SOLD
    The only ford i would drive is a courier!

  3. #3
    BL Metalhead thechariot's Avatar
    Join Date
    Nov 2004
    Location
    st. louis
    Posts
    2,539
    yes.
    92 blazer 4 door 4.3 2wd, 00 s10, 03 accord v6


    Originally posted by 668
    I fuckin popped her, held back a little, but I clipped her pretty good.


  4. #4
    BLF #1 BITCHES! slow 89's Avatar
    Join Date
    Jun 2002
    Location
    south jersey
    Posts
    5,769
    no they never came with independent.. and how hard it is.. well put it this way.. there isnt a bolt in one..
    WWW.HAGGARDFAB.COM

    //NC\\
    Negative Camber

  5. #5
    BL Metalhead thechariot's Avatar
    Join Date
    Nov 2004
    Location
    st. louis
    Posts
    2,539
    i know they never came with it, but i want to know if its ever been done, cus i think i remember someone doing it but i could be wrong...but just wondering about it...
    92 blazer 4 door 4.3 2wd, 00 s10, 03 accord v6


    Originally posted by 668
    I fuckin popped her, held back a little, but I clipped her pretty good.


  6. #6
    Registered User blazerjc's Avatar
    Join Date
    Nov 2004
    Location
    Oregon
    Posts
    129
    I did see one in a different S-10 forum. s10 forum.com I think. Try searching the rear-end section.

  7. #7
    fabricator on a dime blaznlowhubby's Avatar
    Join Date
    Apr 2004
    Location
    california (209)
    Posts
    200
    I would like to see someone install an older jag rearend, like a xj-6 they are hot when they are all cromed out. is there anyone out there with a s-10 blazer and a jag rearend or vette?
    dad always said" Keep it simple stupid" K.I.S.S.

  8. #8
    BL Metalhead thechariot's Avatar
    Join Date
    Nov 2004
    Location
    st. louis
    Posts
    2,539
    ill check s10forum,


    from what i read over there its hard and costs lots o $$$$ to do a jag rearend, better off going with a late model t bird rear.
    Last edited by thechariot; 07-02-2005 at 09:50 PM.
    92 blazer 4 door 4.3 2wd, 00 s10, 03 accord v6


    Originally posted by 668
    I fuckin popped her, held back a little, but I clipped her pretty good.


  9. #9
    fabricator on a dime blaznlowhubby's Avatar
    Join Date
    Apr 2004
    Location
    california (209)
    Posts
    200
    but I've got a 86 xj6 rearend.but I would not install it with the tin and hardware that jag uses, it hides most of the rearend. I just want to see how much work it would be. anybody got pics of one in a s-10 blazer?
    dad always said" Keep it simple stupid" K.I.S.S.

  10. #10
    Double Bagged s10blaza's Avatar
    Join Date
    Mar 2003
    Location
    El Paso, TX
    Posts
    5,951
    how's this for IRS





  11. #11
    Double Bagged s10blaza's Avatar
    Join Date
    Mar 2003
    Location
    El Paso, TX
    Posts
    5,951
    ooh here's another one with a 'Vette IRS






  12. #12
    BL Metalhead thechariot's Avatar
    Join Date
    Nov 2004
    Location
    st. louis
    Posts
    2,539
    that last truck is amazing. wow. thanks.
    92 blazer 4 door 4.3 2wd, 00 s10, 03 accord v6


    Originally posted by 668
    I fuckin popped her, held back a little, but I clipped her pretty good.


  13. #13
    Stalker Nate Audiodogg's Avatar
    Join Date
    Apr 2002
    Location
    Langley, BC, Canada
    Posts
    2,610
    I know a guy who did a IRS on a 1st Gen Blazer. Took some time but as long as you know what you're doing it can be done. I'm not sure if he's got any pics on the net though, I try and find some. It's got more camber in the rear than the front :D

    Nate

  14. #14
    BL Metalhead thechariot's Avatar
    Join Date
    Nov 2004
    Location
    st. louis
    Posts
    2,539
    hmm..

    i know what camber looks like but...hows it happen?
    92 blazer 4 door 4.3 2wd, 00 s10, 03 accord v6


    Originally posted by 668
    I fuckin popped her, held back a little, but I clipped her pretty good.


  15. #15
    Breakin Necks Prez CunT StuD's Avatar
    Join Date
    Aug 2002
    Location
    Orlando FL
    Posts
    1,503
    i saw a lime green 2nd gen 4dr on 20's with an IRS somewhere on streetsource, or car domain. i saw it at the begining of this year i think, and if i remember correctly it was for sale
    -You have 2 ears and one mouth, so u need to listen twice as much as u talk-

    www.myspace.com/breakinnecksprez

    http://www.streetsourcemag.com/im/vi...x?id=Blazed22s

    http://members.cardomain.com/9chevblaze6

    4 DOOR LOVE

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •