Results 1 to 3 of 3

Thread: drop springs

  1. #1
    draggin rocker member clean n low 84's Avatar
    Join Date
    Nov 2001
    Location
    portland, oregon
    Posts
    3,099

    drop springs

    i have control arm's with a 3 inch drop, i'm thinking about throwing in some 2 inch drop springs...how much will this change the ride quialty? and also will i notice a big change if i were to take out my 3' blocks in back and put in 4'? what should i do fellas? i dont want any bitchs bitchin when there in my ride!! :D but i needa be lower at the same time!!

    HELP!!!!THANKS

  2. #2
    draggin rocker member clean n low 84's Avatar
    Join Date
    Nov 2001
    Location
    portland, oregon
    Posts
    3,099
    HELP PLEASE!!! :D :D :D

  3. #3
    BlazinLow Pilot SlimGu3's Avatar
    Join Date
    Oct 2001
    Location
    California
    Posts
    1,891
    Going any lower than you already have will change your ride somewhat. As long as you don't slam it to the bumpstops, it wont be bad at all. If you get drop springs the ride will be a little stiffer, I would suggest spindles before springs (if you can get them for drop c-arms). 4" blocks in the rear doesn't change much as for ride quality. You will need pinion shims and maybe pancake bumpstops. It wont be bad at all....
    ...some bitches like it bouncy:D
    I like my trucks like I like my women; WHITE & SHAVED!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •