Results 1 to 13 of 13

Thread: a 'Q' for <ONELOW>

  1. #1
    The ONE and The ONLY BlazinBlue's Avatar
    Join Date
    Oct 2001
    Location
    Broken Arrow,OK
    Posts
    1,585

    a 'Q' for <ONELOW>

    Hay <onelow> , You have Camaro Rims on your Truck, RIGHT? well my question is on the Tire size.um... what is it? Just wondering because I'm bagging my BLAZER and I found a set of wheels that are the same for cheep.

    Everyone- I might go for another set of cheep Chrome wheels from U.S. wheels. I'm thinking of just getting the same offset that is on a camaro. Is the camaros offset different from a S10's? are Stock camaro rims 8" wide? I need to be able to tuck in the next few months, and I'm low on money.

    Thanx:cool:
    Tulsa Chaper VP - Vertically Challenged
    :smoker: - 1989 S10 Blazer 2dr - 1995 F/S 4x4 -:smoker:

    BLAZINLOW MEMBER #11

  2. #2
    BlazinLow Pilot SlimGu3's Avatar
    Join Date
    Oct 2001
    Location
    California
    Posts
    1,891
    Camero rims have the same offset/pattern as 2WD S10s. You will be able to tuck 8" wide rims with no problem.
    I like my trucks like I like my women; WHITE & SHAVED!

  3. #3
    The ONE and The ONLY BlazinBlue's Avatar
    Join Date
    Oct 2001
    Location
    Broken Arrow,OK
    Posts
    1,585
    Cool. I have sum rims i got that were supose to have the STOCK offset and there 8in wide. Maybe I'll use them, but sumthing tells me that the offset is not STOCK so I might end up getting different wheels any ways.

    If i was to get 16" wheels, what kind of rubber should I use. I think 45series is to small. What do you suggest?
    Tulsa Chaper VP - Vertically Challenged
    :smoker: - 1989 S10 Blazer 2dr - 1995 F/S 4x4 -:smoker:

    BLAZINLOW MEMBER #11

  4. #4
    BlazinLow Pilot SlimGu3's Avatar
    Join Date
    Oct 2001
    Location
    California
    Posts
    1,891
    You don't want balloon tires. I like to look of 45's myself, but on 16's it will change your guages a little. I'm sayin 50s
    I like my trucks like I like my women; WHITE & SHAVED!

  5. #5
    The ONE and The ONLY BlazinBlue's Avatar
    Join Date
    Oct 2001
    Location
    Broken Arrow,OK
    Posts
    1,585
    I just want to fill up my wheel wells. How much gap will I have with 45s?
    Tulsa Chaper VP - Vertically Challenged
    :smoker: - 1989 S10 Blazer 2dr - 1995 F/S 4x4 -:smoker:

    BLAZINLOW MEMBER #11

  6. #6
    BlazinLow Pilot SlimGu3's Avatar
    Join Date
    Oct 2001
    Location
    California
    Posts
    1,891
    I don't know. What you can do it measure how many inches you thing it's going to take to fill you wells and then go on Tire Rack to find the tires. Any tire you look at has specs and shows the over all diameter. My guess would be 50-55.
    I like my trucks like I like my women; WHITE & SHAVED!

  7. #7
    My S-10 fleet is gone... s10blazed's Avatar
    Join Date
    Oct 2001
    Location
    Near Pittsburgh, PA
    Posts
    7,539
    what's the whole tire size? a 195/45 will be signifigantly different from a 255/45

  8. #8
    The ONE and The ONLY BlazinBlue's Avatar
    Join Date
    Oct 2001
    Location
    Broken Arrow,OK
    Posts
    1,585
    Well, I think what might be best is to get sum tires for my STOCK wheels and drive like that and just wait till I get the $$$ for the wheels I REALLY want for my Truck. My Stock wheels will tuck Right?
    Tulsa Chaper VP - Vertically Challenged
    :smoker: - 1989 S10 Blazer 2dr - 1995 F/S 4x4 -:smoker:

    BLAZINLOW MEMBER #11

  9. #9
    BlazinLow Pilot SlimGu3's Avatar
    Join Date
    Oct 2001
    Location
    California
    Posts
    1,891
    Yes, they should. Actually I'm not sure on a 2wd. Mine only tuck upfront because the camber pulls them in. I'm sure you wont have a problem though.
    I like my trucks like I like my women; WHITE & SHAVED!

  10. #10
    BlazinLow Pilot SlimGu3's Avatar
    Join Date
    Oct 2001
    Location
    California
    Posts
    1,891
    s10- That number is a ratio of between the width (275) and the highth. So yes 195/50 would be differentthan 275/50, but not by a whole lot.
    I like my trucks like I like my women; WHITE & SHAVED!

  11. #11
    My S-10 fleet is gone... s10blazed's Avatar
    Join Date
    Oct 2001
    Location
    Near Pittsburgh, PA
    Posts
    7,539
    yeah, i know its a ratio slim, I been puttin tires on cars for over a year :)

  12. #12
    The ONE and The ONLY BlazinBlue's Avatar
    Join Date
    Oct 2001
    Location
    Broken Arrow,OK
    Posts
    1,585
    What a minute, I went out and checked my Tires. I thought the wheels i ordered a long while back were 16's but there 15's. i was checking my Tire size 2??/60R15:mad: Well, are the camaro rims on onelows truck 15in or 16in. If they are 16, I will most likly search around for a set. if they are 15, I will just stick to the wheels I have.
    Tulsa Chaper VP - Vertically Challenged
    :smoker: - 1989 S10 Blazer 2dr - 1995 F/S 4x4 -:smoker:

    BLAZINLOW MEMBER #11

  13. #13
    non posting whore
    Join Date
    Oct 2001
    Location
    local
    Posts
    199
    hey my wheels r 15 by 7's and the front tires r 195/50's and the rears r 205/50's. when im laying frame my shit rubs so i gotta take out the wheel wells 2 tuck 17's. working on that this winter. they just tuck in the front its real close, back is no problem
    Motionthree.com (610) 960-2921

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •