Page 1 of 5 123 ... LastLast
Results 1 to 15 of 66

Thread: help with beltech 4x4 kit

  1. #1
    not low enough yet! dubs's Avatar
    Join Date
    Feb 2002
    Location
    calgary, canada
    Posts
    419

    help with beltech 4x4 kit

    I'm puting a 3/3 beltech lowering kit on my 93.
    it includes leafs and hardware for the back and I can't remember if it is keys or springs for the front.
    But my question is will my 4x4 still work when it gose in.

  2. #2
    Ricers Suck!
    Join Date
    Aug 2002
    Location
    Michigan
    Posts
    26
    Yeah your 4wheel drive should still work I droped mine and I don't have a problem. hope this helps, peace.

  3. #3
    Let's Go Pens! S/T Lover's Avatar
    Join Date
    Apr 2002
    Location
    Outside Pittsburgh, PA
    Posts
    4,250
    Its keys for the front of a 4wd, because 4wd/awd dont have springs in the front, they use torsion bars. As for the 4x4, Blaza is correct, your 4wd will work fine with it lowered.
    LT1/4L60E/Shaved handles, emblems, antenna/5-4 Drop/16" Xtreme Wheels.


    In 1095, Pope Urban II commanded the beginning of the most heinous period ever documented: The Crusades. While killing over 100,000 Turks in 1098, the Christians "did no other harm to the women found in [the enemy's] tents - save that they ran their lances through their bellies," according to Christian chronicler Fulcher of Chartres.

  4. #4
    '93 Typhoon / 97 Isuzu C-Town216's Avatar
    Join Date
    Jan 2002
    Location
    Cleveland, Ohio
    Posts
    945
    Good luck getting the old keys out. DO NOT use heat to losen any suspension part!
    "All I need iz 1 mic"

  5. #5
    My S-10 fleet is gone... s10blazed's Avatar
    Join Date
    Oct 2001
    Location
    Near Pittsburgh, PA
    Posts
    7,532
    Good ol sledge hammer and a few cans of PB Blaster will do the job after a lot of cursing :bigthumb"

  6. #6
    not low enough yet! dubs's Avatar
    Join Date
    Feb 2002
    Location
    calgary, canada
    Posts
    419

    Thumbs up thanks

    Yaeh i was worried it wouldn't work cause i just spent $1200 on fixing it a few months ago.

    You guys dont think i'll rub my factor 235/75/15's do ya??

  7. #7
    My S-10 fleet is gone... s10blazed's Avatar
    Join Date
    Oct 2001
    Location
    Near Pittsburgh, PA
    Posts
    7,532
    Yeah, they'll rub on the fenders on big bumps. You're gonna have to get smaller tires.

  8. #8
    not low enough yet! dubs's Avatar
    Join Date
    Feb 2002
    Location
    calgary, canada
    Posts
    419

    Red face

    How much smaller??
    And if the stocks rub will my 255/35/20 rub also??

  9. #9
    Warned Member Lucky Dime's Avatar
    Join Date
    Jun 2002
    Location
    Milford, CT
    Posts
    2,043
    Originally posted by dubs
    How much smaller??
    And if the stocks rub will my 255/35/20 rub also??
    oh yea...those 20's will definetly rub

  10. #10
    not low enough yet! dubs's Avatar
    Join Date
    Feb 2002
    Location
    calgary, canada
    Posts
    419

    Unhappy SHIT

    How much? cause i measured the fenders and it looks like it will be okay at that hight.

  11. #11
    Registered User pr1mo360's Avatar
    Join Date
    Mar 2002
    Location
    Henderson,NV
    Posts
    2,562
    your going to need the jaws of life to get those keys out especially a candian blazer ruuussssssttttttyyyyy

  12. #12
    Warned Member Lucky Dime's Avatar
    Join Date
    Jun 2002
    Location
    Milford, CT
    Posts
    2,043

    Re: SHIT

    Originally posted by dubs
    How much? cause i measured the fenders and it looks like it will be okay at that hight.
    prolly only on bumps and shit but 20's are a big rim to put on a 4wd blaze with a 3/3 drop

  13. #13
    not low enough yet! dubs's Avatar
    Join Date
    Feb 2002
    Location
    calgary, canada
    Posts
    419
    How big of a bump?? like a speed bump size one or just anything??

  14. #14
    Registered User flesh's Avatar
    Join Date
    Feb 2002
    Location
    california, PA
    Posts
    85
    just take out the fenderwell.
    living life and cheating death

  15. #15
    Warned Member Lucky Dime's Avatar
    Join Date
    Jun 2002
    Location
    Milford, CT
    Posts
    2,043
    Originally posted by dubs
    How big of a bump?? like a speed bump size one or just anything??
    its prolly gonna rub on every road bump u hit...20's are big for a lowered blaze dude especially 4wd...my buddy has a stock jeep with 20s on it and he has problems every now and then with hittin bumps...did u get the right offset too because u might have problems with turning

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •