Well I am about to order my new engine I figured I would start taking the old one apart so it will be easier to take out. I got every bolt out on the driver side no problem but the 3rd bolt in and the last bolt in on the passenger side arent moving. The 3rd bolt in is totally stripped now and the last bolt probably would move with a wrench but the firewall is way to close to it. When I use a socket on the last bolt it just turns so I gave up on the socket. any suggestions on how to get these 2 bolts out without damaging the heads?? I was just trying to make my mechanics job a little easier and get some stuff out of his way.