Results 1 to 4 of 4

Thread: 1st Gen torsion bars vs 2nd gen

  1. #1
    has no subtitle. ColonelPanic's Avatar
    Join Date
    Jul 2005
    Location
    West Warwick, RI
    Posts
    713

    1st Gen torsion bars vs 2nd gen

    Im looking around to try and find myself some drop components. I don't want to do anything crazy, just a 3/2 or 3/3 drop. I have 4WD, and a frame swap and 2WD is NOT an option. I found this belltech kit on summit, and It lists application for only up to 94. I am curious if it will work on my 95, and i'm pretty sure the only reason they say that is the torsion bars (as far as I know, blocks are blocks, and they shouldn't make a difference). Any input would be greatly appreciated.

    heres the link to the belltech kit.

    http://store.summitracing.com/partde...5&autoview=sku

    thanks again
    -jeff

  2. #2
    Senior Member blazapimpin19's Avatar
    Join Date
    May 2005
    Location
    PGC MD
    Posts
    348
    The kit is the same for 1st and 2nd gen. So yes it will work fine with ur truck.

  3. #3
    has no subtitle. ColonelPanic's Avatar
    Join Date
    Jul 2005
    Location
    West Warwick, RI
    Posts
    713
    Awesome, thank you. Thats the answer I wanted to hear.

    -jeff

  4. #4
    I-roc Azzurri's Avatar
    Join Date
    Nov 2001
    Location
    Vancouver, BC
    Posts
    815
    This was just pointed out in another thread a few minutes ago... good timing, haha. Might be something to consider as well.

    http://www.syty.net/forums/showthread.php?t=47446

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •