Results 1 to 14 of 14

Thread: DJM 2" Drop Spindles S-10 and 94-97 2WD Blazers

  1. #1
    Registered User RuinedAngel's Avatar
    Join Date
    Nov 2005
    Location
    Palm Beach Gardens, FL
    Posts
    16

    DJM 2" Drop Spindles S-10 and 94-97 2WD Blazers

    Hi,
    I recently ordered a set of DJM 2" Drop Spindles for my 2000 GMC Jimmy... only to find out they were the wrong ones. Bought them new, and was never able to mount them.... Box was opened but only to look at them and find out that they wont work with my ABS hub.... Minor oxidation on them because they have been sitting in my garage for the last 2-3 months, no one locally showed interest in them. Redneck neighborhood and dropped trucks are UNHEARD of..... Paid 225 + shipping for them from PerformanceAccessories..... best offer takes them. Dont forget that these things are heavy and UPS said it would be around $30 to ship them, so take that into consideration when considering an offer.
    Couple Pics:




    Sorry, i dont have any refs from this forum, i am more or less a ghost who reads everything.

    But my email is:
    Morbidangel1337@yahoo.com
    AIM S/N:
    RuinedAng3l
    Address:
    13950 Coco Plum Road
    Palm Beach Gardens, FL, 33418

    Hoping someone here can take these things off my hands! :D
    Thanks
    -----------------------------------------------------
    -Alpine CDA-7894 Headunit (red and green backlights)
    -4 6 1/2" Alpine Type-R Components with 2 2 1/2" Tweeters (mounted in roof)
    -JBL 400 Watt RMS Mono Amp
    -JBL 200 Watt RMS x 2 Stereo Amp
    -2 Alpine R10s
    -1 Farad Monster Cap

  2. #2
    OKShowPics
    Join Date
    Oct 2007
    Location
    Oklahoma
    Posts
    60
    Are these the same as the S-10 or are they the special Blazer spindles?

  3. #3
    Registered User RuinedAngel's Avatar
    Join Date
    Nov 2005
    Location
    Palm Beach Gardens, FL
    Posts
    16
    They are S10 Spindles that WILL NOT fit 98+ Blazers.... i am told by my mechanic that 98+ has an ABS wheel bearing....
    -----------------------------------------------------
    -Alpine CDA-7894 Headunit (red and green backlights)
    -4 6 1/2" Alpine Type-R Components with 2 2 1/2" Tweeters (mounted in roof)
    -JBL 400 Watt RMS Mono Amp
    -JBL 200 Watt RMS x 2 Stereo Amp
    -2 Alpine R10s
    -1 Farad Monster Cap

  4. #4
    OKShowPics
    Join Date
    Oct 2007
    Location
    Oklahoma
    Posts
    60
    you'll need the expensive spindles then, but for the price you paid, you should've gotten the expensive ones.

  5. #5
    5.7L VORTEC 350 blazin4low's Avatar
    Join Date
    Aug 2002
    Location
    Jax,FL
    Posts
    2,615
    yeah you need the belltech 2102 spindles................hope you don't need new bearings b/c those are more than the spindles
    http://i158.photobucket.com/albums/t114/VortecBlazer/sidredo.jpg
    Tuned by Bland Tuning
    Transmission built by Transbuilderguy on FSC!
    Marine Intake swap by me

  6. #6
    Registered User RuinedAngel's Avatar
    Join Date
    Nov 2005
    Location
    Palm Beach Gardens, FL
    Posts
    16
    yeah i just bought the Belltech 2102 spindles.... just need to get rid of these to try and make up for some of the cost :/
    -----------------------------------------------------
    -Alpine CDA-7894 Headunit (red and green backlights)
    -4 6 1/2" Alpine Type-R Components with 2 2 1/2" Tweeters (mounted in roof)
    -JBL 400 Watt RMS Mono Amp
    -JBL 200 Watt RMS x 2 Stereo Amp
    -2 Alpine R10s
    -1 Farad Monster Cap

  7. #7
    They both fell..... dube2's Avatar
    Join Date
    Nov 2002
    Location
    West Palm Beach, Fl
    Posts
    784
    Quote Originally Posted by RuinedAngel View Post
    Hi,
    I recently ordered a set of DJM 2" Drop Spindles for my 2000 GMC Jimmy... only to find out they were the wrong ones. Bought them new, and was never able to mount them.... Box was opened but only to look at them and find out that they wont work with my ABS hub.... Minor oxidation on them because they have been sitting in my garage for the last 2-3 months, no one locally showed interest in them. Redneck neighborhood and dropped trucks are UNHEARD of..... Paid 225 + shipping for them from PerformanceAccessories..... best offer takes them. Dont forget that these things are heavy and UPS said it would be around $30 to ship them, so take that into consideration when considering an offer.
    Couple Pics:




    Sorry, i dont have any refs from this forum, i am more or less a ghost who reads everything.

    But my email is:
    Morbidangel1337@yahoo.com
    AIM S/N:
    RuinedAng3l
    Address:
    13950 Coco Plum Road
    Palm Beach Gardens, FL, 33418

    Hoping someone here can take these things off my hands! :D
    Thanks

    lol gardens isn't that redneck I live in west palm and I have two dropped trucks and I am in gardens all the time baby momma live there, good luck with the sale

  8. #8
    Registered User RuinedAngel's Avatar
    Join Date
    Nov 2005
    Location
    Palm Beach Gardens, FL
    Posts
    16
    Lol i live on the Jupiter Farms side though.... its all redneck out here bro....
    -----------------------------------------------------
    -Alpine CDA-7894 Headunit (red and green backlights)
    -4 6 1/2" Alpine Type-R Components with 2 2 1/2" Tweeters (mounted in roof)
    -JBL 400 Watt RMS Mono Amp
    -JBL 200 Watt RMS x 2 Stereo Amp
    -2 Alpine R10s
    -1 Farad Monster Cap

  9. #9
    Registered User RuinedAngel's Avatar
    Join Date
    Nov 2005
    Location
    Palm Beach Gardens, FL
    Posts
    16
    http://cgi.ebay.com/ebaymotors/BRAND...QQcmdZViewItem

    Spindles are here in case anyone wants to try and get them cheap.
    -----------------------------------------------------
    -Alpine CDA-7894 Headunit (red and green backlights)
    -4 6 1/2" Alpine Type-R Components with 2 2 1/2" Tweeters (mounted in roof)
    -JBL 400 Watt RMS Mono Amp
    -JBL 200 Watt RMS x 2 Stereo Amp
    -2 Alpine R10s
    -1 Farad Monster Cap

  10. #10
    CDN 2WD 4door...2nd Gen!! K Dawg ONE's Avatar
    Join Date
    Apr 2007
    Location
    Windsor, Ontario
    Posts
    223
    whats the reserve?
    1995 Jimmy - http://www.cardomain.com/ride/2934125
    Kris Creed | Sales Consultant | Gus Revenberg Chevrolet-Buick-GMC | Windsor, ON | 800-291-1117 x177

  11. #11
    House Of Sparks dragginassjeep's Avatar
    Join Date
    Oct 2007
    Location
    Central Florida
    Posts
    132
    Umm just so you know. Blazer and S-10 pickup spindles are different. BUT a 82' pickup spindles will fit any pickup up too 2004.

    Same goes for Blazers. So if you bought blazer spindles then they will fit any S-10 Blazer. I know this first hand.

  12. #12
    Registered User RuinedAngel's Avatar
    Join Date
    Nov 2005
    Location
    Palm Beach Gardens, FL
    Posts
    16
    $80 is the reserve....
    And these spindles will NOT fit my blazer... i dont know if theres a change between S10 spindles and Blazer spindles.... but these ones will not work on my truck...
    -----------------------------------------------------
    -Alpine CDA-7894 Headunit (red and green backlights)
    -4 6 1/2" Alpine Type-R Components with 2 2 1/2" Tweeters (mounted in roof)
    -JBL 400 Watt RMS Mono Amp
    -JBL 200 Watt RMS x 2 Stereo Amp
    -2 Alpine R10s
    -1 Farad Monster Cap

  13. #13
    Registered User
    Join Date
    Mar 2007
    Location
    Granite City IL
    Posts
    37
    98+ blazers are the only ones differnt i beleive. they run the damn hub bearing/ drop off rotor setups instead of the the taper bearing, hub rotor style. which is nice for upgrades in brakes, but not so much when you have to buy the parts as you have found....lol

  14. #14
    House Of Sparks dragginassjeep's Avatar
    Join Date
    Oct 2007
    Location
    Central Florida
    Posts
    132
    OH excuse me. I wasnt considering the bearing. You are correct. I thought yall were talking about them fitting as in Ball Joints.

    I have the 98+ brake upgrade but I swapped the rotors calipers and all. I stand corrected.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •