Results 1 to 14 of 14

Thread: 01 about 2 bag the back need a lil help

  1. #1
    Registered User BLAZERON20Z's Avatar
    Join Date
    Jul 2005
    Location
    Ft Lauderdale, FLORIDA
    Posts
    31

    01 about 2 bag the back need a lil help

    so am about 2 bag the back not sure about how much of the floor i sould cut and where if any 1 could help i have 20s and am tryin 2 lay out so let me know wut i sould do 2 go about that


    thankz

  2. #2
    Fiberglass Fabrication EpicenterDesigns's Avatar
    Join Date
    Sep 2002
    Location
    Bradenton- FL........hammerin'-grindin'-sandin'-primin'
    Posts
    7,408








    About that much.


    The bitter after-taste of a poor quality job will last far longer than the sweetness of that cheap price!

  3. #3
    bagged member banginjimmy's Avatar
    Join Date
    Jan 2005
    Location
    Dallas, GA
    Posts
    4,159
    when mine was done, the floor was cut from about 6" behind the front seat mounts back to the back of the wheel wells.

  4. #4
    Registered User BLAZERON20Z's Avatar
    Join Date
    Jul 2005
    Location
    Ft Lauderdale, FLORIDA
    Posts
    31
    thankz guys

    any have more pics??!!

    and i got the AIM street scrapers they said that they have 1 to fit a 01 blazer so i am goin 2 try it


    i hope it dose!!!

  5. #5
    bagged member banginjimmy's Avatar
    Join Date
    Jan 2005
    Location
    Dallas, GA
    Posts
    4,159
    never get anything from shAIM. There isnt a kit out there for a 2nd gen blazer if you have a crooked frame.

  6. #6
    I have a wheel fetish ! TRILOGY's Avatar
    Join Date
    Dec 2005
    Location
    LAFAYETTE, INDIANA
    Posts
    768
    Quote Originally Posted by banginjimmy View Post
    never get anything from shAIM. There isnt a kit out there for a 2nd gen blazer if you have a crooked frame.
    x2
    i wouldn't buy anything from those idiots !

  7. #7
    Registered User BLAZERON20Z's Avatar
    Join Date
    Jul 2005
    Location
    Ft Lauderdale, FLORIDA
    Posts
    31
    thankz guy if it dont ill make it fit and work some how!!!

    any thing big i should know about b4 i start cuting shit? lol


    about how long would u say it would take 2 bag the back? a weekend?
    Last edited by BLAZERON20Z; 10-29-2007 at 07:43 AM.

  8. #8
    I need a beer MistaLee's Avatar
    Join Date
    Mar 2003
    Location
    Midland, MI
    Posts
    138
    Quote Originally Posted by BLAZERON20Z View Post
    thankz guys

    any have more pics??!!

    and i got the AIM street scrapers they said that they have 1 to fit a 01 blazer so i am goin 2 try it


    i hope it dose!!!
    :nono: :nono: :nono:

  9. #9
    Fiberglass Fabrication EpicenterDesigns's Avatar
    Join Date
    Sep 2002
    Location
    Bradenton- FL........hammerin'-grindin'-sandin'-primin'
    Posts
    7,408
    Quote Originally Posted by BLAZERON20Z View Post
    any have more pics??!!

    I have a whole thread with lots of pics in the Members projects Section.


    Quote Originally Posted by BLAZERON20Z View Post
    and i got the AIM street scrapers they said that they have 1 to fit a 01 blazer so i am goin 2 try it

    They lied to you. Common for shAIM.




    Quote Originally Posted by BLAZERON20Z View Post
    any thing big i should know about b4 i start cuting shit? lol

    Where your fuel lines are at. Brake lines. You will have to replumb them so you will need more line, flares and the flaring tool.
    Your ride height measurments so you can set the links up parrallel at ride height.
    Can you weld?
    You will be making a new fuel tank mount most likely.
    Don't forget about the crossmembers that need to be notched, the tranny crossmember that needs to be redone. (if you really want to lay out)





    Quote Originally Posted by BLAZERON20Z View Post
    about how long would u say it would take 2 bag the back? a weekend?


    What do you think now?


    The bitter after-taste of a poor quality job will last far longer than the sweetness of that cheap price!

  10. #10
    Registered User BLAZERON20Z's Avatar
    Join Date
    Jul 2005
    Location
    Ft Lauderdale, FLORIDA
    Posts
    31
    thankz man

    yea i can weld

    am just waitin 4 every thing 2 cum in this week and get started this weekend lets see wut happen

    4 the street scrapers itz on airbagit.com am goin 2 try 2 out it may save me some time but i may have 2 do something 2 it 4 it work

    i cant wait i just really want 2 drag!!!!

    i been wanting 2 do this 4 the pass 3 years i was goin 2 do it when i lived in VA b4 i move down 2 FL 4 collage naver happn needed the money 4 school lol so every thing is good 2 go now so i cant wait any more there is not a lot of minitruck out in FL in the MIA area all DONK and shit

    thankz 4 the help

    if u have some thing 2 add 2 wut am doin let me know

  11. #11
    Banned
    Join Date
    Nov 2002
    Location
    Lyndon, Kansas
    Posts
    7,511
    some helpfull advice try to use real words instead of phone text lingo, it hurts some of our heads to read that lol


    89' S10 blazer 4wd: 355, 650 dp, rpm intake, comp 282 roller cam, modified vortecs, T56 Six speed, 8.8 ls rear, headers, x-pipe, spintech pro street mufflers, and......AC

    Blazer burnout video - http://www.youtube.com/watch?v=sP7iLypoDI4

  12. #12
    Fiberglass Fabrication EpicenterDesigns's Avatar
    Join Date
    Sep 2002
    Location
    Bradenton- FL........hammerin'-grindin'-sandin'-primin'
    Posts
    7,408
    Quote Originally Posted by BLAZERON20Z View Post
    i been wanting 2 do this 4 the pass 3 years i was goin 2 do it when i lived in VA b4 i move down 2 FL 4 collage naver happn needed the money 4 school lol so every thing is good 2 go now so i cant wait any more there is not a lot of minitruck out in FL in the MIA area all DONK and shit




    Did you attend the classes at college? Did they check spelling?



    Anyways, check out www.floridaminis.com


    The bitter after-taste of a poor quality job will last far longer than the sweetness of that cheap price!

  13. #13
    Registered User Crucified's Avatar
    Join Date
    Apr 2004
    Location
    SoCal
    Posts
    2,676
    lol.
    CRUCIFIED CHRISTIAN CAR CLUB

    http://lhfriv.org/crucified_car_club



    Sponsors:

    Rims/Tires: KMC Wheels

    http://kmcwheels.com/

    Sunroof/Interior: Corona Sunroofs

    http://www.coronasunroofs.com/

    Fiberglass work:Epicenterdesigns

    EPICENTERDESIGNS

  14. #14
    Registered User GOTDUBZ's Avatar
    Join Date
    Sep 2005
    Location
    Columbus
    Posts
    104
    Heres a couple pics of mine.


    Laid out Blazer X!!! :D TwIzTeD iNtEnTiOns- Ohio
    http://s110.photobucket.com/albums/n102/GOTDUBZ/

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •