Page 1 of 20 12311 ... LastLast
Results 1 to 15 of 291

Thread: Project: Full Feature

  1. #1
    Registered User flnole78's Avatar
    Join Date
    Sep 2007
    Location
    Tallahassee, FL
    Posts
    463

    Project: Full Feature

    I recently bought a 2002 Blazer 2Dr. The plan was to drive it until it was paid off then Stock Floor it or something crazy. Well, I knew this would happen b/c i can't drive anything stock. So I began doing a little work on it. Here it is shortly after I drove it home:





    I bought a couple of parts from a member on here. Only took about 2 months to get them from him but none the less I got them. A brand new set of AVS door poppers and A used set of ECC Step shavers:




    Here is the little bit of damage to the rollpan. Theres also a crack at the edge of the license plate area but that won't matter b/c I am gonna try and shave it off.



    First thing I did was start with the tailgate. I shave the push button as well as the wiper(no pics). Then I started on the plate box.

    Now usually I am against the tilted tags but I figured the s-10 has a straight tag and I didn't want 2 trucks that looked similar so I tilted it 15*:






    The next thing I did was started shaving the doors. I didn't feel like waiting on fillers so I made my own.





    I just finished wiring up the LED's for the tag box last night and started on the filler for the doors as well. I also have a set of 3" lowering springs, 2" blocks, 2" coils and 2" spindles, and all 4 shocks. Just waiting on the funds to buy a c-notch and alignment. Will be a slow process but should be "driveable" soon.

  2. #2
    will work for food! phatfarmer2's Avatar
    Join Date
    Dec 2003
    Location
    North NJ
    Posts
    7,295
    nice man.. any pics of the truck in your avatar?
    Grounded 4 Life
    "continuing where the factory left off"

    Street Source page

    Projects i've done

    V8 Love
    Pneumatic Love

  3. #3
    Registered User 87wildside's Avatar
    Join Date
    Aug 2007
    Location
    Wimington Delaware
    Posts
    77
    X2 on the avatar pics and you gate looks good.

  4. #4
    Registered User flnole78's Avatar
    Join Date
    Sep 2007
    Location
    Tallahassee, FL
    Posts
    463
    Yeah the pics in my avatar are of my project.










    It has a 3.5" Traditional BD with a custom backhalf
    Tilt bed
    Right hand drive
    Colorado Front Conversion
    working on a fully custom front bumper
    fully shaved
    will lay on 22's
    running Slam RE8's all around
    Plan on redoing the rear setup for more lift.

    If you have any questions please ask. Here is the link to my photobucket of about 600 pics

    http://s36.photobucket.com/albums/e10/flnole78/
    Last edited by flnole78; 02-03-2010 at 11:28 PM.

  5. #5
    Under Construction 98low4x4blazer's Avatar
    Join Date
    Apr 2002
    Location
    Columbus Ohio
    Posts
    5,659
    hell yea man, they both look good
    pic's of what my blazer used to be
    Http://www.streetsourcemag.com/Profile.aspx?profileid=22972

    custom parts are built not bought

    When its done, you'll wish it was yours.


  6. #6
    Registered User GOTDUBZ's Avatar
    Join Date
    Sep 2005
    Location
    Columbus
    Posts
    104
    Looks good man.
    Laid out Blazer X!!! :D TwIzTeD iNtEnTiOns- Ohio
    http://s110.photobucket.com/albums/n102/GOTDUBZ/

  7. #7
    Registered User marty313's Avatar
    Join Date
    Dec 2004
    Location
    odessa,delaware
    Posts
    342
    Thats some serious fab work man... Nice job.

  8. #8
    Registered User flnole78's Avatar
    Join Date
    Sep 2007
    Location
    Tallahassee, FL
    Posts
    463
    Here's what I started this weekend. Since I put a tag box in the gate, I felt I didn't want the one that came in the original ECC rollpan. So I decided to removed it. I pretty much just cut the box out and used some Duramix 4040 and a small sheet of ABS to fill the hole.









    I'm still workning on this and the doors this week plus the bolt in C-notch will be here today.

  9. #9
    Registered User flnole78's Avatar
    Join Date
    Sep 2007
    Location
    Tallahassee, FL
    Posts
    463
    The C-notch says it was delivered to my house so I will see in about an hour. I should start installing that this week. Just one step closer to getting this closer to the ground.

  10. #10
    Registered User bmxbang's Avatar
    Join Date
    Jun 2006
    Location
    lees summit, MO
    Posts
    45
    sick man cant wait to see it lower what drop are you going to do on it?
    2001 2dr 2wd blazer 5/6 20s
    http://www.definiteobsessions.com/

  11. #11
    Registered User flnole78's Avatar
    Join Date
    Sep 2007
    Location
    Tallahassee, FL
    Posts
    463
    I have 2" spindles 2 " coils and 3" leafs and 2"blocks so a 4/5 using all belltech stuff. I am using belltech nitro drop shocksa as well. They probably won't make it on the truck until next week or so b/c I will be out of town this weekend.

  12. #12
    Blazin no More Blazed's Avatar
    Join Date
    Dec 2001
    Location
    FSU...Tallahassee FL
    Posts
    2,464
    Great looking stuff. Too bad I graduated from FSU last year, I would have loved to check out these out.

  13. #13
    Registered User
    Join Date
    Jan 2002
    Location
    Kansas City
    Posts
    30
    lookin good
    -Jake
    99 s10 laid on 20s
    98 4dr blazer slammed on 20s

    Kansas City S-Series

  14. #14
    Registered User flnole78's Avatar
    Join Date
    Sep 2007
    Location
    Tallahassee, FL
    Posts
    463
    Thanks guys!

    I made a little more progress on the ECC rollpan. Here's the 1 pic, lol. I plan on molding it to the sides early next week.




    ***edit***img tags were used but the pic won't show I guess you just have to click on it.
    Last edited by flnole78; 01-17-2008 at 08:57 PM.

  15. #15
    ls1+t56+01=love low86blazer's Avatar
    Join Date
    Jul 2004
    Location
    Hockey town of pittsburgh
    Posts
    4,178
    Looking good mang.
    Quote Originally Posted by bayhustle81 View Post
    can i add the vortec to this 4.3 if it didnt come with one?
    Quote Originally Posted by Superbee View Post

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •