Quote Originally Posted by Barebackjimmy View Post
no use the stock upper and lower 4x4 arms get a hole saw the size of the ball joint relief on the lower4x4 a arm cut it out then do the same to the 2wd cutting out the ball joint mounting point weld the 2wd mounting point to the 4x4 arm from under the a arm ,,,to mock it up remove the lower ball joint cut the hole out flip the stock balljoint and then set your 2wd spindal in place lower the ball joint about 2 inches so the upper and lower arms are even hope this helps if you use the lower 4x4 arms you can use the t bars to adjust your suspention.. any thing can be fabbed if you wanna take the time and have balls to cut your shit up
how to convert to 2wd spindles in 2 long sentences :evil: