Page 1 of 2 12 LastLast
Results 1 to 15 of 18

Thread: questions about front bag install

  1. #1
    Registered User buta's94's Avatar
    Join Date
    May 2009
    Location
    oshawa, ON
    Posts
    151

    questions about front bag install

    ok so i have dom 2500 bags going into the front i already have 2inch drop spindles. i was wondering if i will be able to lay out or is there anything else i will have to do?
    i will post pics and i will also post of my rear set up that i did awhile ago any info will help thanks!

  2. #2
    Registered User slonlow2000's Avatar
    Join Date
    Sep 2009
    Location
    Ironton, Mo
    Posts
    107
    Depends on what size wheel and tire your running. Not sure hwo small it has to be on a 1st gen to lay with the inner fenders still in. If you still even have them or not.
    02 Xtreme Blazer, Bagged on 20's
    04 Silverado z71, Mostly stock

  3. #3
    your all sick with sin
    Join Date
    Aug 2007
    Location
    yucaipa, ca
    Posts
    74
    my blazer was about a half inch from laying out on stock rims and tires all the weight of the truck rested on the upper ball joints i also bent them over a few months period of time

  4. #4
    Registered User buta's94's Avatar
    Join Date
    May 2009
    Location
    oshawa, ON
    Posts
    151
    i have the inners still in and i will be running a 205 60 15 up front whitch is approx 24.5 inches tall

  5. #5
    Senior Member blazinmt's Avatar
    Join Date
    Mar 2004
    Location
    great falls MT
    Posts
    1,222
    Take your coils out and jack your tire up and see what binds/ hits what. Key areas to look at will be fender (as stated already) tie rod on your frame up front, your lower control arm on your frame, and your upper ball joint going to shit. It will obvious once you get it done. Just do it and see:D .
    8================D

  6. #6
    Registered User jlyerla's Avatar
    Join Date
    Oct 2007
    Posts
    43
    def. your tie rods hitting your frame!!!!!, and most likely your inners.... and like stated above.... if you are running stock lower control arms... they are prob. hitting your frame also.... they need to be dehumped!!!!

  7. #7
    Registered User buta's94's Avatar
    Join Date
    May 2009
    Location
    oshawa, ON
    Posts
    151
    [IMG][/IMG]

    bed liner on the floor

  8. #8
    Registered User buta's94's Avatar
    Join Date
    May 2009
    Location
    oshawa, ON
    Posts
    151
    [IMG][/IMG]

    back seat back in sloppy wiring but will be tidied up

  9. #9
    Registered User buta's94's Avatar
    Join Date
    May 2009
    Location
    oshawa, ON
    Posts
    151
    [IMG][/IMG]

    compressor mounted up behind pass rear tire

  10. #10
    Registered User buta's94's Avatar
    Join Date
    May 2009
    Location
    oshawa, ON
    Posts
    151
    [IMG][/IMG]

    pressure gagues

  11. #11
    Registered User buta's94's Avatar
    Join Date
    May 2009
    Location
    oshawa, ON
    Posts
    151
    [IMG][/IMG]

    Slammed

  12. #12
    Registered User buta's94's Avatar
    Join Date
    May 2009
    Location
    oshawa, ON
    Posts
    151
    [IMG][/IMG]

    Front lifted

  13. #13
    Registered User buta's94's Avatar
    Join Date
    May 2009
    Location
    oshawa, ON
    Posts
    151
    [IMG][/IMG]

    front bags

  14. #14
    Doesnt look like this supernova's Avatar
    Join Date
    May 2002
    Location
    baton rouge, la
    Posts
    6,558
    looks great, but those are some little tires

  15. #15
    Registered User buta's94's Avatar
    Join Date
    May 2009
    Location
    oshawa, ON
    Posts
    151
    rears are 235/60/15 fronts are 205/60/15 and lays out with inners still in

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •