Results 1 to 3 of 3

Thread: Power Performance opinions

  1. #1
    Registered User hdridinas2's Avatar
    Join Date
    Jul 2007
    Location
    Waldorf, MD
    Posts
    217

    Power Performance opinions

    So I need new tie rods and ball joints, and was looking at the power performance set up. I was thinking about getting the whole kit, plus the ball joints. Any one have any experience with this stuff? trying to find something that will last longer then a year. Adavance auto ball joints lasted me about a year.

    Also, has anyone taking some stock control arms, and made the bushings greaseable. I was thinking of when I replace the bushings, drilling a hole in the control arm through the bushing, and installing a grease fitting. Think it would work?

  2. #2
    Registered User suncad03's Avatar
    Join Date
    Sep 2005
    Location
    mooresville, NC
    Posts
    259
    i have the power performance steering kit that sd.com sells and it's been 2 years no problems and i have there ball joints to in my sd arms. i have never herd of drilling out the bushings and making them greaseable. i dont see why that would not work

  3. #3
    dreamin85 dreamin85's Avatar
    Join Date
    Jul 2007
    Location
    down home dixie land!
    Posts
    147
    Unless the bushings are urathane, they will deteriate from grease. If they are urathane, you have to use the proper grease.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •