Results 1 to 6 of 6

Thread: qustion about upper and lowe control arms

  1. #1
    Registered User
    Join Date
    Apr 2009
    Posts
    14

    qustion about upper and lowe control arms

    Ok I was told that s10 upper and lowers are the same as 78-87 monte carlos and malibu's any info would help thanks

  2. #2
    Graphic Artist 4 hire Whataburger's Avatar
    Join Date
    Dec 2009
    Location
    Houston, Texas
    Posts
    80
    yes, front suspensions are interchangeable, but the G-body uses 12mm bolts and the S10 uses 1/2"

  3. #3
    Blazin no mo Forklift's Avatar
    Join Date
    Dec 2002
    Location
    Vancouver WA
    Posts
    8,597
    and the spindles are the same as some of the bigger cars like the older Elektra and Boneville (I think)
    04 EC Silverado 4.8L,Pioneer, Rockford Fosgate, K&N, Viper, ACT, USSpeedo, Matrix, Whelen, Blackbear, 22" Eagles, Nittos,Russel,Magnaflow
    85 S-15 2.5L/4spd, RF P1 subs, highs & T4004, JL 250/1, SD 4-link, AIM LCAs, 1/2 valves, Blazer interior, 17" Eagles w/BFGs, phantom grill, 140 amp alt

  4. #4
    Registered User
    Join Date
    Apr 2009
    Posts
    14
    thanks guys

  5. #5
    Registered User LowKeyblazer's Avatar
    Join Date
    Jun 2007
    Location
    gr michigan
    Posts
    172
    i think only the uppers and spindles are the same. the lowers are diff.

  6. #6
    Registered User
    Join Date
    Dec 2005
    Posts
    30
    UCA's are the same, spindles are the same, LCA's are the same except one of the bushings is different.

    Later, Doug
    A turbo: exhaust gasses go into the turbocharger and spin it, witchcraft happens and you go faster. - Jeremy Clarkson

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •