Results 1 to 4 of 4

Thread: 1.6 rockers

  1. #1
    [IMG]http://i577.photobuc S-10 Hawaii's Avatar
    Join Date
    Feb 2010
    Posts
    34

    1.6 rockers

    Wanted to know if I could swap the oe rocker for sum 1.6 rollers.. Will they fit under the valve cover and what else would I need to do to make them work properly.. Btw thanks for all the help blazin low peeps
    91 S-10 4.3 VIN Z
    movin to GA from HI.. Wish I could bring my chevy

  2. #2
    Zombie Killer 6SpeedBlazer's Avatar
    Join Date
    May 2004
    Location
    Lake St. Louis
    Posts
    6,594
    Quote Originally Posted by S-10 Hawaii View Post
    Wanted to know if I could swap the oe rocker for sum 1.6 rollers.. Will they fit under the valve cover and what else would I need to do to make them work properly.. Btw thanks for all the help blazin low peeps

    if you have steel valve covers they will fit just fine.

    if you go to 1.6 ratio you need to enlarge the push-rod hole to keep the push-rod from rubbing the cylinder head.

  3. #3
    [IMG]http://i577.photobuc S-10 Hawaii's Avatar
    Join Date
    Feb 2010
    Posts
    34
    Thanks man.. It's alrite to use the stock push rods..
    91 S-10 4.3 VIN Z
    movin to GA from HI.. Wish I could bring my chevy

  4. #4
    Zombie Killer 6SpeedBlazer's Avatar
    Join Date
    May 2004
    Location
    Lake St. Louis
    Posts
    6,594
    Quote Originally Posted by S-10 Hawaii View Post
    Thanks man.. It's alrite to use the stock push rods..
    if they fit you can use them, but you should always check them to be sure.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •