Results 1 to 15 of 15

Thread: EDC Bracket

  1. #1
    Registered User staticblazer89's Avatar
    Join Date
    May 2010
    Location
    South Detroit
    Posts
    48

    EDC Bracket

    Ive found only two companies that still possibly sell York 209 brackets for pre-95 with the alt on the right hand side. The price is still pretty steep. Has anyone on here made a bracket for themselves on this application?
    "One Life, One Chance"

  2. #2
    will work for food! phatfarmer2's Avatar
    Join Date
    Dec 2003
    Location
    North NJ
    Posts
    7,295
    i made my own was fairly easy.
    Grounded 4 Life
    "continuing where the factory left off"

    Street Source page

    Projects i've done

    V8 Love
    Pneumatic Love

  3. #3
    Registered User staticblazer89's Avatar
    Join Date
    May 2010
    Location
    South Detroit
    Posts
    48
    you have any pictures or anything on how you did it? Cause i have the compressor i just cant justify spending 350$ for a bracket you know.
    "One Life, One Chance"

  4. #4
    will work for food! phatfarmer2's Avatar
    Join Date
    Dec 2003
    Location
    North NJ
    Posts
    7,295
    ill have to go through my pics and find it... i did this many years ago...
    Grounded 4 Life
    "continuing where the factory left off"

    Street Source page

    Projects i've done

    V8 Love
    Pneumatic Love

  5. #5
    Registered User staticblazer89's Avatar
    Join Date
    May 2010
    Location
    South Detroit
    Posts
    48
    ya..i would really appreciate it...did you ever do a thread or nething on it? Cause i cant really find anything on it
    "One Life, One Chance"

  6. #6
    will work for food! phatfarmer2's Avatar
    Join Date
    Dec 2003
    Location
    North NJ
    Posts
    7,295
    it was in my build thread somewhere...
    Grounded 4 Life
    "continuing where the factory left off"

    Street Source page

    Projects i've done

    V8 Love
    Pneumatic Love

  7. #7
    5.7L VORTEC 350 blazin4low's Avatar
    Join Date
    Aug 2002
    Location
    Jax,FL
    Posts
    2,613
    found it....was bored and like going back through the build thread some times

    http://www.blazinlow.com/forum/showp...postcount=1354

    Quote Originally Posted by phatfarmer2 View Post
    so i addressed my hood not closing cuz of my york sittign so high..

    made this bracket up..





    here it is painted and installed the slots on the bracket act as the tensioner.. i just slide the compressor over more and tighten the bolts when the belt has good tension... btw the stock belt works perfect





    york mounted...



    http://i158.photobucket.com/albums/t114/VortecBlazer/sidredo.jpg
    Tuned by Bland Tuning
    Transmission built by Transbuilderguy on FSC!
    Marine Intake swap by me

  8. #8
    Registered User staticblazer89's Avatar
    Join Date
    May 2010
    Location
    South Detroit
    Posts
    48
    I feel like an idiot, my alternator is on the Driver side. Its still the 4.3 but the pre 95 with the alternator bracket similar to those of the 350 I believe.
    "One Life, One Chance"

  9. #9
    Registered User dragnblazer's Avatar
    Join Date
    Mar 2004
    Location
    Las Vegas, Nv
    Posts
    2,102
    Will this work on 4.3
    My project thread 89 bagged 2door
    http://www.blazinlow.com/forum/showthread.php?t=68023

    Wife's daily
    2002 chevy blazer 4 door 2wd ls

    My daily
    2000 Gmc jimmy 2 door 5 speed

  10. #10
    will work for food! phatfarmer2's Avatar
    Join Date
    Dec 2003
    Location
    North NJ
    Posts
    7,295
    well there ya go thats the pic... it will work on a 4.3 as well as v8
    Grounded 4 Life
    "continuing where the factory left off"

    Street Source page

    Projects i've done

    V8 Love
    Pneumatic Love

  11. #11
    5.7L VORTEC 350 blazin4low's Avatar
    Join Date
    Aug 2002
    Location
    Jax,FL
    Posts
    2,613
    just have to get rid of you A/C if you still have it
    http://i158.photobucket.com/albums/t114/VortecBlazer/sidredo.jpg
    Tuned by Bland Tuning
    Transmission built by Transbuilderguy on FSC!
    Marine Intake swap by me

  12. #12
    Registered User dragnblazer's Avatar
    Join Date
    Mar 2004
    Location
    Las Vegas, Nv
    Posts
    2,102
    Nope its gone
    My project thread 89 bagged 2door
    http://www.blazinlow.com/forum/showthread.php?t=68023

    Wife's daily
    2002 chevy blazer 4 door 2wd ls

    My daily
    2000 Gmc jimmy 2 door 5 speed

  13. #13
    5.7L VORTEC 350 blazin4low's Avatar
    Join Date
    Aug 2002
    Location
    Jax,FL
    Posts
    2,613
    then your good to go.....just need some metal and a welder
    http://i158.photobucket.com/albums/t114/VortecBlazer/sidredo.jpg
    Tuned by Bland Tuning
    Transmission built by Transbuilderguy on FSC!
    Marine Intake swap by me

  14. #14
    Registered User dragnblazer's Avatar
    Join Date
    Mar 2004
    Location
    Las Vegas, Nv
    Posts
    2,102
    I need new comps and been thinking about running a edc. The pics help but how did you make it. What kind of steel, size length and so on.
    My project thread 89 bagged 2door
    http://www.blazinlow.com/forum/showthread.php?t=68023

    Wife's daily
    2002 chevy blazer 4 door 2wd ls

    My daily
    2000 Gmc jimmy 2 door 5 speed

  15. #15
    will work for food! phatfarmer2's Avatar
    Join Date
    Dec 2003
    Location
    North NJ
    Posts
    7,295
    if i remember correctly 3/8 top plate, 1/4 everything else...
    Grounded 4 Life
    "continuing where the factory left off"

    Street Source page

    Projects i've done

    V8 Love
    Pneumatic Love

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •