Page 1 of 4 123 ... LastLast
Results 1 to 15 of 58

Thread: Project: lowla (daily driver)

  1. #1
    BANG! BANG! VROOOOM! theKILLSHOT!'s Avatar
    Join Date
    Jun 2010
    Location
    elsberry/st.louis missouri
    Posts
    246

    Talking Project: lowla (daily driver)

    This is the truck I just picked up Friday it's 4 linked and bagged all the way around but just with shradder valves for the moment the plans are just to get its issues fixxed but on with the pics...






    And the can pic (full lift rear l- no loft front)



    It's got a blown bag (front drivers) and a bad pinion yoke and needs a tune up BAD!!! but I only payed $725 for the truck so it needs some work

    If anyone in the area could give me a hand with it it would be most apreciated
    True memories are not set in stone
    Their sculpted from steel and covered with blo0d
    (mayhem)

  2. #2
    5.7L VORTEC 350 blazin4low's Avatar
    Join Date
    Aug 2002
    Location
    Jax,FL
    Posts
    2,613
    lose the toper....but for 725 you have a start....just hope it's not too hacked
    http://i158.photobucket.com/albums/t114/VortecBlazer/sidredo.jpg
    Tuned by Bland Tuning
    Transmission built by Transbuilderguy on FSC!
    Marine Intake swap by me

  3. #3
    The Louder, The Better Nvr2Loud's Avatar
    Join Date
    Nov 2010
    Location
    Pacific North West
    Posts
    131
    LOL dam, that truck needs alot of work, but if you got the time and a couple grand its got a good start. The canopy, FYI, if your going to sell it, it is an ARE TW or T-wedge. New price is around 1200. if you can clean it up its worth probably 300 if you can find someone with an S10 who wants it!

    but not bad for 725, just the parts on it alone are worth that sold on craigslist
    2000 Blazer Xtreme Conversion:bowdown:
    2 Memphis Mojo 12's on 2000w RMS:bowdown:
    SHAVED EVERYTHING:bowdown:

    If its "too loud" or "too low", I don't know you.

  4. #4
    Registered User scooterb's Avatar
    Join Date
    Jun 2009
    Posts
    142
    good luck more pics of the set up

  5. #5
    BANG! BANG! VROOOOM! theKILLSHOT!'s Avatar
    Join Date
    Jun 2010
    Location
    elsberry/st.louis missouri
    Posts
    246
    I've been under it it's not too hacked but it's a homemade airbar no notch stock control arms (will be changed over to suicide doors units) the cap is going to get sold after winter and I will just start over on the bed cause this one is trash and it needs a new back wall for the cab as well as the drivers side cab side from the suicide door failing on the highway on a previous owner it's got a 5 gal tank but that's not enough air and it came with " candlestick valves" what ever the he'll that is and a compressor but it's an airlift as far as I know the tank and compressor will be repurposed for the blazer :-) and a clear 10 switch box but it needs the cable replaced and a 12 pole switch sticks more pics to come just keep in mind guys I work 2 jobs so I don't have all the time in the world to mess with her
    True memories are not set in stone
    Their sculpted from steel and covered with blo0d
    (mayhem)

  6. #6
    BANG! BANG! VROOOOM! theKILLSHOT!'s Avatar
    Join Date
    Jun 2010
    Location
    elsberry/st.louis missouri
    Posts
    246
    As of current my list of needed parts is:
    New air tanks
    Smc valves (1/2")
    Dot air line 50'
    9 wire switch box cable
    Fittings
    Compressors
    Air pressure gauges
    Blazer over head console
    1- 12 pole switch
    Upper and lower tubular control arms
    Drop spindles

    Oh and a new bed cab(easier to do a vin tag swap than fix mine)
    A phantom grill shell
    Stock lower valance or different bumper
    And swap the craigar ss rims for ANYTHING different


    And probably much much more
    I really need someone who's got a similar set up to take a look at mine and tell me what all I need
    Last edited by theKILLSHOT!; 09-27-2011 at 03:57 PM.
    True memories are not set in stone
    Their sculpted from steel and covered with blo0d
    (mayhem)

  7. #7
    Registered User dragnblazer's Avatar
    Join Date
    Mar 2004
    Location
    Las Vegas, Nv
    Posts
    2,102
    good luck with the build!
    My project thread 89 bagged 2door
    http://www.blazinlow.com/forum/showthread.php?t=68023

    Wife's daily
    2002 chevy blazer 4 door 2wd ls

    My daily
    2000 Gmc jimmy 2 door 5 speed

  8. #8
    I'm BATMAN! Harley's Avatar
    Join Date
    Jun 2003
    Location
    Warren, MI
    Posts
    2,420
    I've got a tan Blazer overhead console if you're interested.
    Black 'n Tanazer, Long Bed, Coupe Quattro, Old Caddy, Old Rice

    Member of the SCUDS Task Force
    Spike Clean Up & Disposal Service

  9. #9
    The Louder, The Better Nvr2Loud's Avatar
    Join Date
    Nov 2010
    Location
    Pacific North West
    Posts
    131
    hey, tan can be painted or covered easy!
    2000 Blazer Xtreme Conversion:bowdown:
    2 Memphis Mojo 12's on 2000w RMS:bowdown:
    SHAVED EVERYTHING:bowdown:

    If its "too loud" or "too low", I don't know you.

  10. #10
    BANG! BANG! VROOOOM! theKILLSHOT!'s Avatar
    Join Date
    Jun 2010
    Location
    elsberry/st.louis missouri
    Posts
    246
    Well I finally got more pics so here they are:
    My hurst t-handle and my monster can shifter! Lol


    suicide hinges... ALLLL messed up!


    Damage to cab corner


    Holes in bed


    My patched blow through


    My airbags


    My bad pinion yoke


    My bad pinion yoke with me moving it


    The upper 4 link mount to the gas tank xmember


    That's all I have for now
    True memories are not set in stone
    Their sculpted from steel and covered with blo0d
    (mayhem)

  11. #11
    5.7L VORTEC 350 blazin4low's Avatar
    Join Date
    Aug 2002
    Location
    Jax,FL
    Posts
    2,613
    http://i158.photobucket.com/albums/t114/VortecBlazer/sidredo.jpg
    Tuned by Bland Tuning
    Transmission built by Transbuilderguy on FSC!
    Marine Intake swap by me

  12. #12
    BANG! BANG! VROOOOM! theKILLSHOT!'s Avatar
    Join Date
    Jun 2010
    Location
    elsberry/st.louis missouri
    Posts
    246
    Yeah I know
    True memories are not set in stone
    Their sculpted from steel and covered with blo0d
    (mayhem)

  13. #13
    Thought it was unloaded.. mattmobile's Avatar
    Join Date
    Oct 2003
    Location
    Corn Belt
    Posts
    897
    Quote Originally Posted by blazin4low View Post

    Hahaha!! My favorite reply since I've been on this board!

  14. #14
    will work for food! phatfarmer2's Avatar
    Join Date
    Dec 2003
    Location
    North NJ
    Posts
    7,295
    that thing is pretty beat... and im saying that in the nicest possible way...
    Grounded 4 Life
    "continuing where the factory left off"

    Street Source page

    Projects i've done

    V8 Love
    Pneumatic Love

  15. #15
    BANG! BANG! VROOOOM! theKILLSHOT!'s Avatar
    Join Date
    Jun 2010
    Location
    elsberry/st.louis missouri
    Posts
    246
    Yeah it is really beat up but I'm going to get it going better soon I'm looking for a bed and a new cab to replace mine that are trashed but I'm not saying it will be an overnight thing so don't expect results overnight
    True memories are not set in stone
    Their sculpted from steel and covered with blo0d
    (mayhem)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •