Page 1 of 3 123 LastLast
Results 1 to 15 of 38

Thread: Silverado by Epicenter Designs

  1. #1
    Fiberglass Fabrication EpicenterDesigns's Avatar
    Join Date
    Sep 2002
    Location
    Bradenton- FL........hammerin'-grindin'-sandin'-primin'
    Posts
    7,408

    Silverado by Epicenter Designs

    Long time no post.


    Gonna bring you up to speed on a current project I have leaving this week. It's an 07 Silverado xcab on 24s.
    I am putting all Crescendo Audio in this.
    Currently has a wall for two 18s but I believe plans for that have changed. He is talking walk-thru. He has 8 DC Lvl5 15s and getting more. But thats the future.



    Anywho, lets get some pics up.


    The bitter after-taste of a poor quality job will last far longer than the sweetness of that cheap price!

  2. #2
    Fiberglass Fabrication EpicenterDesigns's Avatar
    Join Date
    Sep 2002
    Location
    Bradenton- FL........hammerin'-grindin'-sandin'-primin'
    Posts
    7,408





    The bitter after-taste of a poor quality job will last far longer than the sweetness of that cheap price!

  3. #3
    Fiberglass Fabrication EpicenterDesigns's Avatar
    Join Date
    Sep 2002
    Location
    Bradenton- FL........hammerin'-grindin'-sandin'-primin'
    Posts
    7,408








    The bitter after-taste of a poor quality job will last far longer than the sweetness of that cheap price!

  4. #4
    Fiberglass Fabrication EpicenterDesigns's Avatar
    Join Date
    Sep 2002
    Location
    Bradenton- FL........hammerin'-grindin'-sandin'-primin'
    Posts
    7,408







    The bitter after-taste of a poor quality job will last far longer than the sweetness of that cheap price!

  5. #5
    Fiberglass Fabrication EpicenterDesigns's Avatar
    Join Date
    Sep 2002
    Location
    Bradenton- FL........hammerin'-grindin'-sandin'-primin'
    Posts
    7,408




    The bitter after-taste of a poor quality job will last far longer than the sweetness of that cheap price!

  6. #6
    Fiberglass Fabrication EpicenterDesigns's Avatar
    Join Date
    Sep 2002
    Location
    Bradenton- FL........hammerin'-grindin'-sandin'-primin'
    Posts
    7,408




    The bitter after-taste of a poor quality job will last far longer than the sweetness of that cheap price!

  7. #7
    Fiberglass Fabrication EpicenterDesigns's Avatar
    Join Date
    Sep 2002
    Location
    Bradenton- FL........hammerin'-grindin'-sandin'-primin'
    Posts
    7,408
    Remember this pic?














    Turned them into something worth looking at.











    The bitter after-taste of a poor quality job will last far longer than the sweetness of that cheap price!

  8. #8
    Fiberglass Fabrication EpicenterDesigns's Avatar
    Join Date
    Sep 2002
    Location
    Bradenton- FL........hammerin'-grindin'-sandin'-primin'
    Posts
    7,408








    The bitter after-taste of a poor quality job will last far longer than the sweetness of that cheap price!

  9. #9
    Fiberglass Fabrication EpicenterDesigns's Avatar
    Join Date
    Sep 2002
    Location
    Bradenton- FL........hammerin'-grindin'-sandin'-primin'
    Posts
    7,408









    The bitter after-taste of a poor quality job will last far longer than the sweetness of that cheap price!

  10. #10
    Fiberglass Fabrication EpicenterDesigns's Avatar
    Join Date
    Sep 2002
    Location
    Bradenton- FL........hammerin'-grindin'-sandin'-primin'
    Posts
    7,408
    Inserts for the doors made by Toolmaker.










    The bitter after-taste of a poor quality job will last far longer than the sweetness of that cheap price!

  11. #11
    Fiberglass Fabrication EpicenterDesigns's Avatar
    Join Date
    Sep 2002
    Location
    Bradenton- FL........hammerin'-grindin'-sandin'-primin'
    Posts
    7,408
    Some of the console

















    The bitter after-taste of a poor quality job will last far longer than the sweetness of that cheap price!

  12. #12
    Fiberglass Fabrication EpicenterDesigns's Avatar
    Join Date
    Sep 2002
    Location
    Bradenton- FL........hammerin'-grindin'-sandin'-primin'
    Posts
    7,408
    The console is actually 6 pieces. The base, the top section to hold the EQ, the padded armrest piece, 2 speaker inserts and then the slide in crossover.


    The bitter after-taste of a poor quality job will last far longer than the sweetness of that cheap price!

  13. #13
    Fiberglass Fabrication EpicenterDesigns's Avatar
    Join Date
    Sep 2002
    Location
    Bradenton- FL........hammerin'-grindin'-sandin'-primin'
    Posts
    7,408
    A-pillars were planned to hold two 5.25 and tweets. But they were just to big. Especially on the drivers side.

    Went with 4 tweeters instead. Soft domes so they don't over power your senses.














    The bitter after-taste of a poor quality job will last far longer than the sweetness of that cheap price!

  14. #14
    Fiberglass Fabrication EpicenterDesigns's Avatar
    Join Date
    Sep 2002
    Location
    Bradenton- FL........hammerin'-grindin'-sandin'-primin'
    Posts
    7,408




    The bitter after-taste of a poor quality job will last far longer than the sweetness of that cheap price!

  15. #15
    Fiberglass Fabrication EpicenterDesigns's Avatar
    Join Date
    Sep 2002
    Location
    Bradenton- FL........hammerin'-grindin'-sandin'-primin'
    Posts
    7,408
    The trim rings for the speakers in the console.....









    The bitter after-taste of a poor quality job will last far longer than the sweetness of that cheap price!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •