Results 1 to 3 of 3

Thread: Wiring question

  1. #1
    Suicide door havin member DRUNK411's Avatar
    Join Date
    Feb 2002
    Location
    Connecticut
    Posts
    2,174

    Wiring question

    So I am building an 89 blazer that I plan on putting a typhoon motor in the whole truck is full custom. I am full airride and body dropped already it is going to be a show car. I will be running an aftermarket fuel cell and pump for fuel. And the truck will have no AC just a vintage air heat setup, I also was thinking about running all autometer gauges for everything instead of the stock cluster. Very very minimal basic wiring with all custom interior/dash. So now that I gave a brief description of what my plans are this is my question. Has anyone done or thought about using one of these harnesses and would it be possible to do with the Typhoon setup? I also have the full wiring harness out of a typhoon already but dont really want to start hacking into it if I dont need too or if this will be easier.

    if you go to the bottom of the page it tells you whats included in the 22 circuit kit

    http://www.streetrodelectrics.com/ca...FcRM4AodD13awg

    This is the link to the kit I was thinking about using
    http://www.streetrodelectrics.com/pr...g-Harness.html
    S-10 blazer rollin' on dubs and bagged... what what!!!

    Soon to have a typhoon engine.

    "Bottles are for babies, real men get blown!"

    DRUNK411 (11:558 PM): I think that is a guy man
    DragginBlazer (11:55:52 PM): me too
    DRUNK411 (11:56:19 PM): that is not cool by any means
    DRUNK411 (11:56:37 PM): why would u even subject yourself to that being a woman and all
    DRUNK411 (11:56:46 PM): I mean would u really want that on the internet

    That is how we felt about the thread below. Check it out if you dare it is very scary!!

    How we felt on this post

    Pics of my ride:
    http://www.streetsourcemag.com/Profile.aspx?profileid=15102

  2. #2
    will work for food! phatfarmer2's Avatar
    Join Date
    Dec 2003
    Location
    North NJ
    Posts
    7,295
    well you need the computer to run the typhoon motor, which is basically integrated in your whole harness... but you might be able to buy the harness built for the 4.3 http://www.ronfrancis.com/products.asp?dept=288 and hook it up to the typhoon motor, but then you still need a body wiring kit, IMO it would be easier to just modify your harness, and remove what you dont need...
    Grounded 4 Life
    "continuing where the factory left off"

    Street Source page

    Projects i've done

    V8 Love
    Pneumatic Love

  3. #3
    Suicide door havin member DRUNK411's Avatar
    Join Date
    Feb 2002
    Location
    Connecticut
    Posts
    2,174
    I have the Ty computer I know I need that. As for body harness I don't really have anything it's all custom. I think I basically only need engine harness and under dash stuff. I have very simple stuff in the truck.
    No cruise
    Led tails
    Headlight and blinkers
    No reverse lights
    Fuel pump
    Interior light
    Electric fan
    12v outlet
    Radio
    No wipers
    Wb02
    Gauges
    That's pretty much it to be honest
    S-10 blazer rollin' on dubs and bagged... what what!!!

    Soon to have a typhoon engine.

    "Bottles are for babies, real men get blown!"

    DRUNK411 (11:558 PM): I think that is a guy man
    DragginBlazer (11:55:52 PM): me too
    DRUNK411 (11:56:19 PM): that is not cool by any means
    DRUNK411 (11:56:37 PM): why would u even subject yourself to that being a woman and all
    DRUNK411 (11:56:46 PM): I mean would u really want that on the internet

    That is how we felt about the thread below. Check it out if you dare it is very scary!!

    How we felt on this post

    Pics of my ride:
    http://www.streetsourcemag.com/Profile.aspx?profileid=15102

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •