Results 1 to 2 of 2

Thread: Brake pedel to the floor

  1. #1
    Registered User
    Join Date
    Mar 2012
    Location
    ny
    Posts
    20

    Brake pedel to the floor

    Sometimes my brake pedel will feel very spongy an go right to the floor, usually wen im slowly turning around

  2. #2
    5.7L VORTEC 350 blazin4low's Avatar
    Join Date
    Aug 2002
    Location
    Jax,FL
    Posts
    2,613
    If you have drop spindles I would say you need to trim more off your upper a-arm. Take your wheel off the front and put a jack under the lower a-arm and load the suspension to about where it would be on the ground. Then turn lock to lock and make sure your calipers are not hitting the upper a-arms. Also check brake lines for pinching.
    http://i158.photobucket.com/albums/t114/VortecBlazer/sidredo.jpg
    Tuned by Bland Tuning
    Transmission built by Transbuilderguy on FSC!
    Marine Intake swap by me

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •