Results 1 to 5 of 5

Thread: Brake Line Kits

Hybrid View

  1. #1
    Registered User
    Join Date
    Apr 2012
    Location
    Orlando, Fl
    Posts
    22

    Brake Line Kits

    Ok, so I am ready to run the brake lines. I have been looking at a few kits. The thing im not sure of is will the braided hoses connect to the stock disc up front and the rear drums. Ive added the kit I am thinkin of but if anyone knows for sure it itll work or a kit that will chime in! ive also thought about buying pre made lines (from autzone or autoparts sotre) and bending them to fit or hoping they would fit lol. Im ready to drive this SOB!

    Edit: Also looking for a 1st gen s10/blazer proportiong valve for disc/drum. I cant find anything in auto parts stores

    http://www.jegs.com/i/JEGS-Performan...rentProductId=

    http://www.jegs.com/p/JEGS-Performan...59679/10002/-1
    Last edited by Loud&Bagged97; 06-30-2012 at 09:21 PM.

  2. #2
    My Tape Deck Broke
    Join Date
    May 2010
    Posts
    188
    my buddie makes these. ive used them on a few them a few times. they work grate. http://www.summitracing.com/parts/TIL-90-2003/
    Honk if you love peace and quiet

  3. #3
    5.7L VORTEC 350 blazin4low's Avatar
    Join Date
    Aug 2002
    Location
    Jax,FL
    Posts
    2,613
    you have to buy two of these for the front calipers http://www.jegs.com/i/JEGS-Performan...00740/10002/-1

    as for the rear the drums use the normal double flare hard line fittings which should be in the kit

    Russell makes stock replacement SS lines and so does Kore3 http://www.kore3.com/index.php I bought the Russell kit when I found a deal on it ofr $55 shipped. When I did the rear disc swap I bought a set of Kore3 lines for the rear calipers. Both products are good.

    and if you need a stock disc/drum prop valve I have mine that I just took off when I did my disc/disc swap, I'm im Jax so shipping would be cheap. $30shipped if you want it, if not and you want a new one here's a link to speedwaymotors http://www.speedwaymotors.com/gm-dis...ets,46424.html
    http://i158.photobucket.com/albums/t114/VortecBlazer/sidredo.jpg
    Tuned by Bland Tuning
    Transmission built by Transbuilderguy on FSC!
    Marine Intake swap by me

  4. #4
    Registered User
    Join Date
    Apr 2012
    Location
    Orlando, Fl
    Posts
    22
    Edit: I liek that prop valve kit. Let me see what I have to spare friday and I may get it off you. Im lookin for the simplest kit so I dont have to bend and shape a whole lot aroudn the frame and c notch. The front should be simple but going ot the back with hard lines is what im dreading
    Last edited by Loud&Bagged97; 07-02-2012 at 04:21 PM.

  5. #5
    5.7L VORTEC 350 blazin4low's Avatar
    Join Date
    Aug 2002
    Location
    Jax,FL
    Posts
    2,613
    send me a PM with your info if you want it. If not no big deal, it will be on my bench until someone needs it.
    http://i158.photobucket.com/albums/t114/VortecBlazer/sidredo.jpg
    Tuned by Bland Tuning
    Transmission built by Transbuilderguy on FSC!
    Marine Intake swap by me

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •