Results 1 to 3 of 3

Thread: 2.5 four speed tranny wont go into gear.

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Registered User
    Join Date
    Aug 2012
    Location
    Miami
    Posts
    15

    2.5 four speed tranny wont go into gear.

    I rebuilt the motor on my truck and decided since it was already out i would replace the flywheel,pressure plate, and clutch. I also did the clutch slave cylinder and clutch master. with the truck off it goes into all gears, when I turn the truck on and its running i press the clutch pedal and it wont let me go into gear. I shut it off put in first gear start it up and the truck will move but wont go into any other gear.
    Im lost and have no Idea what the problem could be. any ideas??? Thanks

  2. #2
    Zombie Killer 6SpeedBlazer's Avatar
    Join Date
    May 2004
    Location
    Lake St. Louis
    Posts
    6,594
    you have air in your clutch hydraulic system.

  3. #3
    Registered User
    Join Date
    Aug 2012
    Location
    Miami
    Posts
    15
    yeah thats what it looks like it might be. every search I make it all ends up in people saying that they are having a hard time getting the air out of the system and so am I. Thanks

    by the way do you know if I can bleed the system with out having that black rubber diaphragm in but with the cap on?

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •