Results 1 to 7 of 7

Thread: Need some info / parts

  1. #1
    Registered User Blaz90's Avatar
    Join Date
    Dec 2002
    Location
    San Diego, CA
    Posts
    1,138

    Need some info / parts

    So a while back my trans went out and was replaced by TCI Sizzler trans that bolted right up to my 4.3 V6.
    The issue is I can not get a inspection plate back on it now.
    The stock one did not fit and the I ordered one from Jegs and the one they sent doesn't fit either.
    I called Jegs back and double checked, they said it was the correct one.
    I tried to trim it to fit, no luck.
    Anyone have any good ideas what to do in this situation?

  2. #2
    Registered User Blaz90's Avatar
    Join Date
    Dec 2002
    Location
    San Diego, CA
    Posts
    1,138
    bump

  3. #3
    will work for food! phatfarmer2's Avatar
    Join Date
    Dec 2003
    Location
    North NJ
    Posts
    7,295
    i got a custom 700r4 from bowetieoverdrives.com and as well my inspection plate didnt fit... so i just left it off for now.
    Grounded 4 Life
    "continuing where the factory left off"

    Street Source page

    Projects i've done

    V8 Love
    Pneumatic Love

  4. #4
    Registered User Blaz90's Avatar
    Join Date
    Dec 2002
    Location
    San Diego, CA
    Posts
    1,138
    I'm thinking that's just temporary but other then spend days trying to fab it up, I got no ideas!

  5. #5
    will work for food! phatfarmer2's Avatar
    Join Date
    Dec 2003
    Location
    North NJ
    Posts
    7,295
    possibly trim a stock one down? at one point i think i did, but dont rember what happened to it.. lol
    Grounded 4 Life
    "continuing where the factory left off"

    Street Source page

    Projects i've done

    V8 Love
    Pneumatic Love

  6. #6
    Registered User Blaz90's Avatar
    Join Date
    Dec 2002
    Location
    San Diego, CA
    Posts
    1,138
    I tried to trim back the after market one and that didn't work. The stock one is currently MIA, so I got to get a replacement from the yunkyard.

  7. #7
    Registered User Blaz90's Avatar
    Join Date
    Dec 2002
    Location
    San Diego, CA
    Posts
    1,138
    Anyone got a stock 4.3 V6 fly wheel cover around they want to get rid of?

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •