Page 2 of 3 FirstFirst 123 LastLast
Results 16 to 30 of 45

Thread: New Guy: "1989 GMC Jimmy S15 Project"

  1. #16
    Chris Ansin529's Avatar
    Join Date
    Aug 2013
    Location
    Fayetteville North Carolina
    Posts
    37
    "Success is the ability to go from one failure to the next with no loss of enthusiasm"

  2. #17
    Chris Ansin529's Avatar
    Join Date
    Aug 2013
    Location
    Fayetteville North Carolina
    Posts
    37
    The black engine is a stock sbc 350 that I overhauled and first installed in the Jimmy. The red engine is a built 355 I just
    overhauled (about three months old).

    It is a sbc 350 four bolt main bored .30 over, block decked .005, balanced cast rotating assembly, forged flat top pistons, fullarp bolt replacement (inside and out - block, rods, heads and intake), 239/242 and .519/.524 hydraulic roller cam, edelbrock performer rpm heads, aftermarket valve springs, comp cams 1.6 roller rockers, edelbrock performer rpm intake, edelbrock 650 and 750 cfm carburetors, ac delete box, patriot headers 1-7/8", knock off billet aluminum heidistributor, accel 8mm spark plugwires, dual electric cool fans, and much more than I can think of right now
    Last edited by Ansin529; 08-30-2013 at 07:45 PM.
    "Success is the ability to go from one failure to the next with no loss of enthusiasm"

  3. #18
    Chris Ansin529's Avatar
    Join Date
    Aug 2013
    Location
    Fayetteville North Carolina
    Posts
    37
    I utilize a 700r4 transmission and I just installed a 2600 rpm stall torque converter. I installed a floor shifter from a 2000 GMC Jimmy S15 and it looks and
    works great.
    "Success is the ability to go from one failure to the next with no loss of enthusiasm"

  4. #19
    Chris Ansin529's Avatar
    Join Date
    Aug 2013
    Location
    Fayetteville North Carolina
    Posts
    37
    "Success is the ability to go from one failure to the next with no loss of enthusiasm"

  5. #20
    Chris Ansin529's Avatar
    Join Date
    Aug 2013
    Location
    Fayetteville North Carolina
    Posts
    37
    "Success is the ability to go from one failure to the next with no loss of enthusiasm"

  6. #21
    Chris Ansin529's Avatar
    Join Date
    Aug 2013
    Location
    Fayetteville North Carolina
    Posts
    37
    "Success is the ability to go from one failure to the next with no loss of enthusiasm"

  7. #22
    Chris Ansin529's Avatar
    Join Date
    Aug 2013
    Location
    Fayetteville North Carolina
    Posts
    37
    "Success is the ability to go from one failure to the next with no loss of enthusiasm"

  8. #23
    Chris Ansin529's Avatar
    Join Date
    Aug 2013
    Location
    Fayetteville North Carolina
    Posts
    37
    "Success is the ability to go from one failure to the next with no loss of enthusiasm"

  9. #24
    Chris Ansin529's Avatar
    Join Date
    Aug 2013
    Location
    Fayetteville North Carolina
    Posts
    37
    "Success is the ability to go from one failure to the next with no loss of enthusiasm"

  10. #25
    Chris Ansin529's Avatar
    Join Date
    Aug 2013
    Location
    Fayetteville North Carolina
    Posts
    37
    "Success is the ability to go from one failure to the next with no loss of enthusiasm"

  11. #26
    Chris Ansin529's Avatar
    Join Date
    Aug 2013
    Location
    Fayetteville North Carolina
    Posts
    37
    "Success is the ability to go from one failure to the next with no loss of enthusiasm"

  12. #27
    Chris Ansin529's Avatar
    Join Date
    Aug 2013
    Location
    Fayetteville North Carolina
    Posts
    37
    "Success is the ability to go from one failure to the next with no loss of enthusiasm"

  13. #28
    Chris Ansin529's Avatar
    Join Date
    Aug 2013
    Location
    Fayetteville North Carolina
    Posts
    37
    "Success is the ability to go from one failure to the next with no loss of enthusiasm"

  14. #29
    Chris Ansin529's Avatar
    Join Date
    Aug 2013
    Location
    Fayetteville North Carolina
    Posts
    37



    This video is my current sbc 355 (built/cammed) before it was tuned. I am still trying to work the bugs out of this engine. It has truly stumped me.

    Should be able to click on video and it automatically play.
    Last edited by Ansin529; 08-30-2013 at 08:19 PM.
    "Success is the ability to go from one failure to the next with no loss of enthusiasm"

  15. #30
    Chris Ansin529's Avatar
    Join Date
    Aug 2013
    Location
    Fayetteville North Carolina
    Posts
    37
    "Success is the ability to go from one failure to the next with no loss of enthusiasm"

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •