Results 1 to 2 of 2

Thread: stock or drop torsion keys

  1. #1
    Registered User
    Join Date
    Oct 2013
    bucks P.A

    stock or drop torsion keys

    will a set of 1" to 3"
    inch torshion keys go any lower than the stock ones with the bolt taken out on a 97 blazer 4x4 I would like the front to be down another 3" inch

  2. #2
    '93 Typhoon / 97 Isuzu C-Town216's Avatar
    Join Date
    Jan 2002
    Cleveland, Ohio
    If you stack a stock torsion key on top of a factory 1 and look down through the hex hole you'll get a pretty good idea of how much the lower control arm angle will change. You'll most likely have 2 remove the rubber bump stops or you'll B bottomed out.
    "All I need iz 1 mic"

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts