94-97 body mounts for 1.5 drop on 98 up

NORCAL SS · 09-16-2007, 08:25 PM

Ok guys years ago i swapped the 94-97 body mounts on 2 customers 98 up blazers because the 94-97 are smaller

so off the bat when i pick up my 02 4 door im going to do this same thing again butt

DOES ANYONE HAVE THE PART NUMBERS TO THE 94-97 4 DOOR BLAZER BODY MOUNTS

thanks.

NORCAL SS · 09-16-2007, 11:33 PM

bump

http://lmctruck.com/icatalog/cst/0037.asp

gm changed 5 14 and 21 in 98

zblazer99 · 09-17-2007, 12:42 AM

does it seriously give you that much more drop?

NORCAL SS · 09-17-2007, 12:59 AM

check out how much frame shows on a 94-97 blazer vs a 98 up blazer that will answer that. ill be taking pics of everything and measurements when i get my blazer on friday. then ill compare to a 97 andpost it up here.

**blazinmt** · 09-17-2007, 10:44 AM

Quote:

Originally Posted by zblazer99

does it seriously give you that much more drop?

x2, skeptical but interested

**ti28** · 09-17-2007, 11:08 AM

Quote:

Originally Posted by blazinmt

x2, skeptical but interested

x3

**98low4x4blazer** · 09-17-2007, 10:08 PM

i have heard this before but a 1.5" sounds like alot to me

NORCAL SS · 09-17-2007, 10:15 PM

Quote:

Originally Posted by 98low4x4blazer

i have heard this before but a 1.5" sounds like alot to me

ill take pics i did this back like 5 years ago. I know it was at least 1 inch.

Maybe some of the 94-97 4 door guys can take pics of their blazer body mounts and vs the 98 up 4 door guys you will see it.

Sure tell sign is if your looking at the frame from a 94-97 truck and vs a 98 up look how much more the 98 up shows.

99blaze · 09-17-2007, 10:18 PM

i kinda want to do this if it does give you at least 1'' of drop.
and if its not really hard and can be done is a few hours.

stateofidleness · 09-17-2007, 10:39 PM

i was under the impression that the 98 up blazer body mounts WERE 1.5"... so replacing them with another mount wont GIVE you 1.5", it will give you the 1.5" - height of 97under mount.

ProfessorKaos · 09-17-2007, 10:44 PM

I really want to see how well this turns out...

RailBlazer · 09-18-2007, 04:32 AM

This also going to work on the 98+ 2 doors?

SmokeeJay · 09-18-2007, 11:36 AM

I would like to see how this turns out. How difficult are the body mounts to replace?

LowKeyblazer · 09-18-2007, 12:41 PM

from what i can see under the truck,the most you could drop is about 1" or the body would be directly on the frame.so 3/4" to still allow some flex and road dampening is the most you should go unless you dont care about noise and ride quality

low86blazer · 09-18-2007, 02:49 PM

its the actual mounts not the bushings that are higher. so unless u cut n weld its not gonna drop.

09-16-2007, 08:25 PM	#1
NORCAL SS Registered User Join Date: Sep 2007 Posts: 119 Ride: Seller Rating: (0)	94-97 body mounts for 1.5 drop on 98 up Ok guys years ago i swapped the 94-97 body mounts on 2 customers 98 up blazers because the 94-97 are smaller so off the bat when i pick up my 02 4 door im going to do this same thing again butt DOES ANYONE HAVE THE PART NUMBERS TO THE 94-97 4 DOOR BLAZER BODY MOUNTS thanks.

09-17-2007, 12:42 AM	#3
zblazer99 Registered User Join Date: Sep 2005 Location: Decatur IL Posts: 367 Ride: 1992 s-10 show truck Seller Rating: (0)	drop? does it seriously give you that much more drop? __________________ 2007 silverado crew cab static drop (5.3) ss 22's 1992 s-10 lt1 350 air ride (5.7) 2006 SS impala (5.3 v8)

09-17-2007, 10:08 PM	#7
98low4x4blazer Blazin Low Supporter Under Construction Join Date: Apr 2002 Location: Columbus Ohio Posts: 5,616 Ride: 1998 4x4 S-10 Blazer Seller Rating: (7)	i have heard this before but a 1.5" sounds like alot to me __________________ pic's of what my blazer used to be Http://www.streetsourcemag.com/Profile.aspx?profileid=22972 custom parts are built not bought When its done, you'll wish it was yours.

09-17-2007, 10:39 PM	#10
stateofidleness Registered User Join Date: May 2007 Posts: 220 Ride: Seller Rating: (0)	i was under the impression that the 98 up blazer body mounts WERE 1.5"... so replacing them with another mount wont GIVE you 1.5", it will give you the 1.5" - height of 97under mount. __________________ 1998 Blazer I'm new to all this / bear with me. My Blazer Buildup: http://home.satx.rr.com/stateofidleness i'm a geek. plans mostly include carputing. any questions just ask.

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

09-16-2007, 11:33 PM	#2
NORCAL SS Registered User Join Date: Sep 2007 Posts: 119 Ride: Seller Rating: (0)	bump http://lmctruck.com/icatalog/cst/0037.asp gm changed 5 14 and 21 in 98

09-17-2007, 12:59 AM	#4
NORCAL SS Registered User Join Date: Sep 2007 Posts: 119 Ride: Seller Rating: (0)	check out how much frame shows on a 94-97 blazer vs a 98 up blazer that will answer that. ill be taking pics of everything and measurements when i get my blazer on friday. then ill compare to a 97 andpost it up here.

09-17-2007, 10:18 PM	#9
99blaze Registered User Join Date: Oct 2006 Location: Pensacola Fl Posts: 342 Ride: 1999 blazer 4dr 2wd Seller Rating: (1)	i kinda want to do this if it does give you at least 1'' of drop. and if its not really hard and can be done is a few hours.

09-18-2007, 04:32 AM	#12
RailBlazer Registered User Join Date: Jun 2007 Location: PHX, AZ Posts: 94 Ride: 00 2wd 2dr Seller Rating: (0)	This also going to work on the 98+ 2 doors?

09-18-2007, 11:36 AM	#13
SmokeeJay Registered User Join Date: Feb 2007 Location: Douglasville, GA Posts: 15 Ride: 2001 Blazer Seller Rating: (0)	I would like to see how this turns out. How difficult are the body mounts to replace?

09-18-2007, 12:41 PM	#14
LowKeyblazer Registered User Join Date: Jun 2007 Location: gr michigan Posts: 122 Ride: 99 blazer ls 4 by 4 Seller Rating: (0)	from what i can see under the truck,the most you could drop is about 1" or the body would be directly on the frame.so 3/4" to still allow some flex and road dampening is the most you should go unless you dont care about noise and ride quality